ALD

Dimetix Rango Real-Time Millimeter Direct Read HMI Panel: Millimeter Reflection Accuracy and High Brightness LED Display (RS-422)

Magnetostrictive, non-contact | Voltage or 4…20 mA output | Stroke 50…2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC or 24 VDC | 350 bar · IP67

4-20 mA ∝ rms acceleration | 2Hz to 1kHz ±10% | Ex ia IIC T6 Ga · Ex ia IIIC T85 °C Da | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32V DC | Stainless steel, IP67

Voltage, current or ratiometric output | Ø 36mm | Resolution 16 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | 2 to 16 turns (up to 5760°)

Contactless Transmission | 5 – 20 N·m | 20,000 RPM | Shaft-to-Shaft Coupling

Contactless, separate actuator | Hollow shaft Ø4, 5, 6, 8 or 10 mm | 8 to 2048 pulses/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 1 MHz

Indoor CO2 sensor, range up to 4000 ppm, analog output and relay alarm

ORP probe by immersion in PVC tube. Length 720 mm. With SZ265 probe

Conductivity range from 4 to 2,000 mS/cm and TDS (total dissolved solids) from 10ppt to 1,000ppt 4…20mA and Modbus output

Shaft Ø8 h7 | 80 mm square flange | 1 to 1024 imp/rev | NPN, push-pull or line driver | Power supply 5–30 V | IP54 shaft (IP65 Z-seal) | Max. frequency 60 kHz