PS1 PRESSURE
PS1
- Manufacturer: DPF Sensors
- Category: SENSORS, Level Sensors
Liquids. Level Sensor
Properties
 | 0..1 to 0…250 meters of water column |
|---|---|
| -10…80°C medium temperature |
| 0.25 % precision BFSL |
| Output signal 4…20 mA, 0…10 Vdc, 1…5 Vdc |
| Atmospheric pressure compensated by vent pipe |
| Compensated cable |
Other products
PID controller (heat-cold), temperature probe reading, regulation output control, integrated in power SSR module
Indoor temperature and relative humidity sensor with MODBUS RTU RS-485 communication and wall or DIN rail mounting.
USB to RS232/485 Bi-Directional Isolator Converter
Power supply 5-30V | Shaft diameter 15-20 mm | Weight 340 g | IP65 | Output 6000 RPM Max | Starting torque 90 gcm | Bearing life 1.5 x 10^9 rev | Impact resistance 50 G | Operating temperature 0-70 °C | Maximum frequency 100 kHz
Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable front interior power supply 24.. 230VAC-DC (±15%) isolated
Side Output | Triaxial Measurement (X, Y, Z) | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP54 Protection | Aluminum Housing | 4-Pin M12 Connector
Incremental Encoder | Stainless Steel Base | 20mm Shaft Diameter | 5V Power Supply | Push-Pull Output | IP65 Protection | Long Bearing Life | 50G Impact Resistance | Operating Temperature -30 to 85°C | 120mA Current Consumption
Power Supply 5-30V | Hollow Shaft Ø6-8mm | Weight 230g | Maximum Load 0.5kg | Continuous RPM 3000 | Bearing Life 1500M | Impact Resistance 50G | Temperature -30 to 85C | Pulses/Rev 1-5000 | Push-Pull/NPN Output
I/44Q – Compact Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 44×56 mm, Pulse range: 1 to 2,540