DP 120
Combined wind speed and direction sensor
- Manufacturer: DPF Sensors
- Category: Meteorology – Climatology, SENSORS, Wind
The DP120-xxx wind speed and direction combination sensor is made of aluminum alloy, which has high environmental resistance.
Speed range 0-70 m/s Direction range 0-360 °
Output signal 4-20 mA, 0-5 Vdc, RS485, RS232, NPN pulses (for anemometer)
Properties
Other products
Aluminum housing Ø59 mm with integrated elastic coupling | CANopen / CAN (C2) or fiber optic CAN (CF) interface | ISO 11898 CAN transceiver, max. transmission speed 1 MBaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Hollow shaft F7: Ø15 mm standard (Ø8, Ø10, Ø12 or others on request) | Coupling compensation: axial ±0.1 mm, radial ±0.2 mm, angular ±1° | IP64 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C
Highly robust Ø72 mm | Max. axial/radial load 8 kg | Hollow shaft Ø6 to Ø10 mm | Internal star coupling | Axial compensation ±3 mm | Max. frequency 100 kHz (300 kHz optional) | 1 to 25000 imp/v | Anodized aluminum base and Valox 420 cover | Weight 470 g | IP64 on the shaft side (IP66 sealed)
Top Input | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Isolated AC Output | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | 2-pin Connector Mil-C-5015
LVDT Displacement Sensor | Outputs 4-20mA, 0-10V, 0-5V | IP67 Waterproof | Diameter 10mm | German Grade Accuracy | Special for Crack Monitoring
Housing Ø58 mm | Composite material and Valox | Front centering Ø36 h7 | Solid shaft Ø10 h7 | 1 to 1024 pulses/revolution | Max. frequency 60 kHz | Power supply 5÷30 V | Weight 145 g | Operating temperature 0 … +60 °C | Max. speed 6000 rpm
Three-phase voltage monitoring relay. Overvoltage, undervoltage, and sequence
Illuminance sensor, lux meter, measuring range: 0-2000lux / 0-20klux / 0-200klux
Housing Ø68 mm | Resolution up to 2048 steps/revolution (11 bit) | Gray, Binary, Excess, and BCD codes | Parallel, SSI, or analog output (mA/V) | Power supply 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø6 h7 stainless steel spindle | Max. radial/axial load 2 kg | Spindle-side protection IP64 (IP66 sealed) | Max. continuous speed 6000 rpm (8000 rpm under torque) | Operating temperature 0…+70 °C