ANESR biaxial ultrasonic anemometer

Budget-friendly price Request a quote
2 x 4÷20mA | 0 ÷ 50 m/s · 0 ÷ 360° | 4 ultrasonic cells | 162 x 320mm | 10÷30Vdc | IP65

El NESA ANESR es un anemómetro ultrasónico biaxial para la medida de la velocidad del viento (0 ÷ 50 m/s) y de la dirección (0 ÷ 360°) a lo largo de dos ejes ortogonales X e Y del plano horizontal, con 4 células ultrasónicas y brújula automática para el Norte verdadero. Conforme a WMO y EN 15518-3:2011.

No tiene partes móviles. Cuerpo de resina y aleación de aluminio anodizado (IP65). Salida 2 x 4÷20mA, alimentación 10÷30Vdc y consumo inferior a 1 W.

Key points

  • Velocidad: 0 ÷ 50 m/s, resolución < 0,1 m/s, precisión ± 3 %
  • Dirección: 0 ÷ 360°, resolución 1°, precisión ± 2°
  • Salida 2 x 4÷20mA (velocidad y dirección)
  • No moving parts
  • Funcionamiento de -20 a +60 °C

Technical Frequently Asked Questions

¿Qué tipo de señal entrega el sensor ANESR?

Dos salidas 4÷20mA: una para la velocidad y otra para la dirección del viento.

¿Cómo se pide el anemómetro ANESR?

Sensor (ANESR), salida (B: 4÷20mA), cable sensor-datalogger (05, 10 o xx, longitud en metros a especificar) y soporte SSU de L = 700-750 mm. Ejemplo del fabricante: ANESR B 10 SSU. Referencia: ANESR.

What advantages does the absence of moving parts offer?

Al no tener partes móviles, el sensor sirve para funcionamiento continuo en condiciones ambientales duras.

Properties

FeatureSpecification
Measurement and transducer
Measured magnitudeWind speed and direction on the horizontal plane
Speed range0 ÷ 50 m/s
Steering range0 ÷ 360°
Speed resolution< 0,1 m/s
Address resolution1°
Speed accuracy± 3 %
Steering accuracy± 2°
Transducer type4 ultrasonic cells
Anemometric parametersVelocidad, dirección, componentes U-V, brújula automática para el Norte verdadero
Regulatory complianceWMO and EN 15518-3:2011; CE
Output signals and interface
Exit2 x 4÷20mA (speed and direction)
Electrical connectionConector de 7 pines
Nutrition and environmental conditions
Feeding10÷30Vdc
Consumption< 1 W (típico 30 mA @ 15Vdc)
Operating conditions-20 to +60 °C
Degree of protectionIP65; protecciones contra inversión de polaridad y transitorios
MaterialsAluminum alloy and thermoplastic resin
Dimensions320 x 162 mm (see drawing)
Weight1 kg
ReferenceConfiguration
ANESRANESRModel: ANESR · Speed and direction range: 0 ÷ 50 m/s · 0 ÷ 360° · Output signal: 2 x 4÷20mA, with calibration report
NESA ANESR bidirectional ultrasonic anemometer
Dimensiones del anemómetro ultrasónico bidireccional ANESR de NESA

Other products

ATESTEO LOGO, manufacturer of torque sensors
Inductive Transducer | 1,000 N·m | 20,000 RPM Limit | 101.5 mm PCD Flange | Class 0.02% | Inertia 0.0033 kg·m²
NESA Environmental Meters
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · 0-20 mS/cm | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire Ø 1.35 mm | Stroke 10, 15, 20, 25 or 30 m | Resolution 0.1 or 1 mm | PROFIBUS-DP Class 2 | 10–30 V DC | IP64 (IP65 connection covers) | Linearity ±0.05 % fs.
NESA Environmental Meters
Reed, 0÷2Vdc, 4÷20mA, RS485 / Modbus | Class A | 400 cm² | 0.2 mm/imp. | 0÷600 mm/h | 10÷30Vdc
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo or screw mounting, Ø58 mm | Shaft Ø6 h7 | 1–3600 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Two isolated electronics
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø10 H7, optional Ø6, 8 or 9.52 | Up to 65536 steps × 16384 revolutions | SSI (RS422), optional preset | 10–30 V power supply | IP65 shaft (IP66 sealed) | Star coupling, ±3 mm ax. | Gray code or binary
DPF Sensors logo
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Profile 18 x 18 mm | Stroke 10 … 100 mm | Linearity ±0.05 … ±0.25 % | Repeatability ±0.002 mm | IP40 | Cable, connector M8 or M16
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
CANopen (C2) or fiber optic (CF) | B10 flange, Ø11 h7 shaft | 16 bit; 30 bit in 16384 turns | Up to 1 Mbaud | 10–30 V DC | IP65 shaft (IP66 sealed)
Produal logo
Differential pressure transducer for liquids
Shopping Basket