DP 110.xx
Budget-friendly price Request a quote
Wind direction sensor
- Manufacturer: DPF Sensors
- Category: Meteorology – Climatology, SENSORS, Wind
The wind direction sensor is an essential component in weather monitoring systems.
Designed to accurately measure wind direction at a reduced cost, with an accuracy better than 1°
The output signal can be in mA, Vcc and RS485 communication.
Properties
Related documentation, cases, and guides
Other products
Amplified LVDT inductive sensor | Strokes 100 and 200 mm | Square housing 30×30 mm | Outputs 0/4–20 mA, 0–10 V and ±10 V | Linearity 0.25 % / 0.5 % | IP67 with suitable connector | Integrated electronics
CAN SAE J1939 | 41.5 x 58 mm max. | 14-bit resolution | 6 mm shaft diameter | 12/24 VDC (8 … 34 VDC) | IP67 / IP69K | 1 or 2 channels
Amplifier for proportional solenoid valves, voltage regulation (speed)
Shaft Ø9.52 h7 | Square flange 63.5 mm | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 Z-seal) | 100 kHz (300 kHz optional)
CANopen | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Adapts digital signals from one type and/or level to another.
Process indicator, 32 x 74 format, LARGE FORMAT display, Pt100 input – Thermocouple – mA – Vcc – potentiometer
Industrial pressure sensor, -1.0 /…2.5 /0…6 /0…10 /…16 /0…25 /0…60 /… 100 /…250 /…400 /….600 Bar, 4-20 mA output, via M12 connector, 1/4″ thread
PROFIBUS-DP Class 2, 12 Mbaud | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Hollow shaft Ø6–15 mm | Standardized flange Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Internal helical coupling