DV-DVR Wind Direction Sensor

Budget-friendly price Request a quote
0 ÷ 359° | Resolution 0.1° | ± 1° | 335 mm | Precision potentiometer | 0÷2Vdc, 4÷20mA, RS485 / Modbus or 10Kohm

El NESA DV-DVR es un sensor de dirección del viento (gonioanemómetro) con potenciómetro de precisión. DV es la versión estándar y DVR la versión calefactada. Campo de medida 0 ÷ 359° (360°), resolución 0,1° y precisión ± 1° (sensibilidad: 0,25 m/s; umbral < 0,5 m/s).

Outputs: 0-2Vdc (A), 4-20mA (B), RS485/Modbus (C) or 10Kohm potentiometer (N). Power supply: 10-28Vdc <0.1W; heated version: 5W@12Vdc. IP67 quick-connect. WMO and CE compliant.

Key points

  • Measurement range 0 ÷ 359° (360°); resolution 0.1°; accuracy ± 1°
  • Transducer: vane with precision potentiometer
  • Outputs: 0÷2Vdc (A), 4÷20mA (B), RS485 / Modbus (C) or 10Kohm potentiometer (N)
  • Power supply 10 ÷ 28Vdc <0.1W; DVR heater 5W@12Vdc
  • -10 to +70°C; -35 to +70°C in the heated version; gusts 0 to 80 m/s
  • Anodized aluminum and stainless steel; < 460g; IP67 quick connection

Technical Frequently Asked Questions

What does the DV-DVR measure?

Wind direction, from 0 to 359° (360°), with 0.1° resolution and ± 1° accuracy.

What exits does it have?

A: 0-2Vdc. B: 4-20mA. C: RS485 / Modbus. N: 10Kohm natural potentiometer. Output impedance of 50 ohms in versions A and B.

What is the difference between DV and DVR?

La DVR lleva calefactor (5W@12Vdc), con pines 6 y 7 para su alimentación (+12V Calefacción y Gnd Calefacción), y trabaja de -35 a +70°C; la DV, de -10 a +70°C.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeWind direction
Typical measurement range0 ÷ 359° (360°)
Resolution0,1°
Precision± 1°
Sensitivity0.25 m/s
Threshold< 0.5 m/s
Transducer typeWeather vane with precision potentiometer
CalibrationGoniometric system, by comparison with a certified goniometer
Regulatory complianceEC
StandardsWMO
Exit signals
Exit A0÷2Vdc
Exit B4÷20mA
Exit CDigital RS485 / Modbus
Output N (natural)10Kohm Potentiometer
Output impedance50 ohm in versions A and B
Power supply, environment, and mechanical data
Food and consumption10 ÷ 28Vdc <0.1W
Power consumption with heater (DVR version)5W@12Vdc
ProtectionsPolarity reversal and transients
Operating conditions-10 to +70°C
Gusts0 ÷ 80 m/s
Operating conditions (heated version)-35 to +70°C
Made inAnodized aluminum and stainless steel
ConnectionIP67 Quick Connect
Weight< 460g
NESA DV-DVR Wind Direction Sensor
Dimensions of the NESA DV-DVR wind direction sensor

Other products

Monitran-Logo
100 mV/g ±10% (IEPE) | 0.8Hz to 10kHz ±5% | ±50g | 30g | -25 to 140°C | 25 mm high, Ø15 mm | Quick Nut Base 1/2″-20 UNF | Stainless steel, IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | IO-Link V1.1, COM 3 | Stroke 50 … 4250 mm | Resolution 1 or 5 µm | 1 to 3 position markers | 18 … 30 VDC | 350 bar · IP67 / IP68
DPF Sensors logo
Industrial LOW pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø10 h7 shaft | 63.5 mm square flange | 1 to 1024 imp/revolution | NPN, PNP, push-pull or driver | 5–30 V power supply | IP65 shaft (IP66 Z-seal) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Shaft Ø6.35 h7 | Flange Ø56 mm | 1 to 600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 Z-sealed) | 40 kHz (75 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Ø 22mm | Resolution 16 bits | Shaft Ø 6 mm | 5 VDC (4.5 … 5.5 VDC) | IP50/IP65 | Measurement range: 44 turns (15840°)
Monitran-Logo
LVDT presurizado de CA o CC | PE: ±25 a ±500 mm, brida y salida radial | PES-2: ±25 a ±300 mm, rosca 1 5/8″-12UN-2A y salida axial | No linealidad ±0,5% | Conector MS de 6 pines IP55
DPF Sensors logo
Indoor humidity and temperature sensor with ModBus RS485 communication
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange Ø115, centered Ø85 h7 | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel pH reference electrode, epoxy body. 9m cable
Shopping Basket