FAT Airflow and Temperature Sensor

Budget-friendly price Request a quote
4-20mA | 0-5 m/s · -20-80 °C | Omnidirectional hot wire | 120 x 80 mm control unit | 12Vdc | IP65

The NESA FAT is an indoor airflow and temperature sensor with an omnidirectional hot-wire probe. It measures air velocity from 0 to 5 m/s (0.01 m/s resolution) and temperature from -20 to 80 °C.

The sensor, located at the top of the probe, is protected by a cage and heated to a specific temperature; the airflow cools it measurably according to its speed. Output: 4÷20mA (FAT-B) and RS485 / Modbus with MCS module.

Key points

  • Air speed 0 ÷ 5 m/s: ±0.02 m/s
  • Temperature -20 ÷ 80 °C: ±0.3 °C (0…70 °C), ±0.4 °C outside that range
  • Omnidirectional hot-wire probe
  • 4÷20mA output; RS485 / Modbus with MCS module
  • 12Vdc power supply, IP65 and 300g

Technical Frequently Asked Questions

What are the FAT's outputs?

The FAT-B model has dual 4÷20mA outputs (air speed and temperature). With the MCS module, it provides RS485/Modbus output.

What does FAT-B include?

5m cable, protective ball and ring for the sensing element, and calibration report. The stand is not included.

How do I order it?

Sensor (FAT), output (B: 4÷20mA), sensor-datalogger cable (05, 10 or xx, length in meters to be specified) and support (SSW, wall mount, L = 7 cm).

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeAirflow speed and temperature
Measurement range (airflow)0 ÷ 5 m/s
Measurement range (temperature)-20 to 80 °C
Resolution0.01 m/s
Accuracy (speed)±0.02 m/s
Accuracy (temperature)±0.3°C (0…70°C); ±0.4°C
Compensation temperature range0 ÷ 80 °C
Transducer typeOmnidirectional hot-wire probe
Regulatory complianceEC
Output signals and interface
Output (version B)4÷20mA (speed and temperature)
With MCS module (optional)RS485 / Modbus (C), with optional dual MCS module
Load resistanceMax. 500 Ω for current outputs
CalibrationIt comes with a calibration report
Power supply, environment, and mechanical data
Feeding12Vdc
ConsumptionTyp. < 0.5 W
ProtectionsAgainst polarity reversal
Degree of protectionIP65
Weight300 g
Supply (FAT-B)5m cable, ball head for the sensitive element and ring; stand not included
ReferenceConfiguration
FAT-BFATBModel: FAT · Output signal: Dual 4÷20mA output · Supplied with: 5m cable, protective ball for the sensitive element and ring; calibration report; stand not included
NESA FAT Hot Wire Airflow and Temperature Sensor
Dimensions of the NESA FAT airflow and temperature sensor

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless, separate actuator | Hollow shaft Ø4, 5, 6, 8 or 10 mm | 8 to 2048 pulses/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 1 MHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage or current output | 18 x 18 mm profile | 25 … 100 mm electrical stroke | Return stem | 16 … 30 VDC | IP40 | Teach-in with LED
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø10 h8 | Up to 65536 steps (16 bits) | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | Optional preset (P1)
Differential pressure switch for air
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Housing Ø50 mm | 100 impedances/revolution with latching | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP64 shaft side (IP65 cable) | 1 m CV radial cable
Monitran-Logo
Triaxial (X, Y, Z axes) | 3 isolated AC outputs of 100 mV/g ±10% | 2 Hz to 9 kHz ±5% | ±80 g | -25 to 125 °C | 4-pin M12 connector | Aluminum, IP54
Dimetix_AG-1
Dimetix Premium IT-OT Bridge Connector for Information Networks. Range: 5 meters of robust cable for direct integration of Sensor-to-PC and RJ45 Switches.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | Ø 36mm | Resolution 16 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | 2 to 16 turns (up to 5760°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6 or Ø8 mm | Housing Ø46.5 mm | 1 to 5000 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Tangential coupling
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Dual shaft Ø6 mm, servo flange | Front centering Ø31.75 h7 | 1 to 10000 imp/v | NPN, PNP, push-pull or line driver | 5–30 V | IP64 shaft (IP65 sealed) | 100 kHz (300 kHz optional)
Shopping Basket