B&C SZ1093 pH Sensor
Combined glass/gel reference pH electrode, epoxy body, size 75x12. with 1.5m BNC cable.
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, pH and Redox Probes
The B&C Electronics SZ1093 pH sensor is a universal digital sensor, compatible with all pH controllers on the market and for all types of stable processes. It provides reliable measurements even at the extremes of the pH range.
This pH electrode allows for precise measurement at an extraordinary cost. Its bulb is constructed of extra-hard glass, while the body is made of epoxy for added protection.
It contains a potassium chloride (KCl) solution inside, which extends its useful life and keeps it in good condition. The sensor does not require additional electrolyte.
Specially designed for use in hydroponic crops.
Properties
- Measuring range: 0 to 13 pH
- Temperature range: 0 to 80 °C
- Body material: Epoxy
- Size: 75X12
- Maximum pressure: up to 8 bars
- Connector: 1.5m cable with BNC connector
- Dimensions: 110 mm in length and 12 mm in diameter
- Application: Measurement in swimming pools and spas
- Zero Point: pH 7
- Accuracy: ± 0.03 pH unit
- Response time: < 10 seconds (95% response)
- pH electrode solution: pH buffer with added chloride
- Reference type: Annular ceramic, sealed
- External reference electrode solution: Polysaccharide gel, 4M KCI with AgCI
Other products
Luminosity sensors (lux meters) for industrial and home automation use
ISO 10816-3 Standard | Color TFT Display | 100 Record Memory | Bearing Analysis | >20h Li-ion Battery | RMS and Peak Measurement | 3.5mm Audio Output | Industrial Rubber Housing | Low-Pass Filters | MTN/2200 Probe Included
I/58H – “Heavy-Duty” Incremental Encoder Ø 58 mm, Solid shaft Ø 10 mm, Body: Ø 58×? mm, Pulse range: 1 to 90,000
Precision tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º
I/40 Miniature Incremental Encoder
Precision Mechanical Support for Laser Aiming Range: Mechanical adjustment of +/- 4° on two axes for stable readings at long distances
Angular and Rotational Sensor | 1 to 64 Rotations | Metal Housing Ø 22 mm | IP68 | Analog and SSI Output | Floating Shaft or Magnet
Cell content K=1cm-1 (2 to 2,000µS) Thread 1″ BSP, body material PVC
Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable