Explosion-proof Incremental Encoder I/0B80EXS

The ELCIS 0B80EXS (I/0B80EXS) is an explosion-proof incremental encoder with a B10 Ø115 flange and a Ø10 h7 shaft, capable of 1 to 10,000 pulses per revolution. It is designed for use in environments with explosive atmospheres of gas «G» and dust «D», excluding firedamp mines, and is ISSeP certified according to CENELEC standards, with markings II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X (or T5 and T100°C) according to EN60079-0, EN60079-1, and EN60079-31. It features an explosion-proof enclosure (d/tb) and ISSeP07ATEX018X certification, where the suffix X indicates special conditions for safe use. It offers 100 kHz (300 kHz optional), 6000 rpm continuous (3000 rpm with sealed bearing), and NPN, PNP, push-pull electronics, 26LS31 and 88C30 drivers, TTL, discriminator, and 1 Vpp sinusoidal output. The base and cover are made of anodized aluminum, and the shaft is stainless steel, with a 10 kg radial/axial load capacity. Ambient temperature ranges from -20 to +40 °C in T6 and -20 to +60 °C in T5, with IP65 protection on the shaft side (IP66 sealed) and a permanently connected IP66 output cable. Cable splicing must be done using an Ex junction box or outside of a potentially explosive atmosphere, and cable end connectors are only to be used outside of explosive atmospheres.

With an explosion-proof enclosure (d/tb) and ISSeP07ATEX018X certification (the X suffix indicates special conditions for safe use), the I/0B80EXS is marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X (or T5 and T100°C) according to EN60079-0/EN60079-1/EN60079-31. It offers 1 to 10,000 pulses per revolution, 100 kHz (300 kHz optional), 6,000 rpm continuous (3,000 with sealed bearing) and NPN, PNP, push-pull output electronics, 26LS31 and 88C30 drivers, TTL, discriminator and 1 Vpp sinusoidal output.

B10 flange (Ø115), anodized aluminum base and cover, and Ø10 h7 stainless steel shaft with 10 kg radial/axial load. Ambient temperature range: -20 to +40 °C in T6 and -20 to +60 °C in T5. IP65 protection on the shaft side (IP66 sealed) and permanently connected IP66 output cable. Cable connection must be made with an Ex junction box or outside the potentially explosive atmosphere, and cable end connectors are only used outside the explosive atmosphere.

• Flange B10 (Ø115) with stainless steel shaft Ø10 h7.
• Marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X (T5: T100°C) for gas and dust.
• Certificate ISSeP07ATEX018X, notified by CESI02ATEX138Q.
• Resolution of 1 to 10000 pulses per lap and up 100 kHz (300 kHz optional).
• Special conditions for safe use (X): cable suitable for 100 °C at a minimum, and quality screws 8.8 at least.