Incremental Encoder with Tachymetric Dynamo I/115TC
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder with Tachometric Dynamo, SENSORS
The need to attach position sensors directly to the motor shaft without mechanical intermediaries complicates installation and increases the risk of misalignment. This Incremental Encoder with Tachometric Dynamo I/115TC eliminates this friction through a design specifically for direct mounting, enabling clean data transmission from the drive source.
The device incorporates a 16mm diameter hollow stainless steel shaft that supports radial loads of up to 18 kg. The internal electronics support a maximum frequency of 100 kHz and offer NPN, PNP, or Push-Pull PRO output configurations, ensuring compatibility with standard industrial controllers without the need for external adapters.
Constructed from anodized aluminum, it withstands operating temperatures between 0 and 70 °C and offers a bearing life of 1.5 x 10^9 revolutions. Its 50 G shock resistance and 12 G vibration resistance ensure reliability in harsh environments. Available in guemisa.es.
- Hollow shaft Ø 16mm for direct coupling to the motor without external adapters.
- Anodized aluminum construction weighing 1650 g for industrial robustness.
- Vibration resistance of 12 G and operating temperature up to 70 °C.
- LED light source with over 100,000 hours of guaranteed lifespan.
Technical Frequently Asked Questions
How does the I/115TC model differ from the standard I/115T model?
The I/115TC model incorporates a 16mm diameter hollow stainless steel shaft designed for direct connection to the motor, unlike the I/115T which uses a solid shaft. This eliminates the need for external adapters and reduces mechanical backlash in high-speed applications up to 6000 rpm.
What alignment precautions are required for the hollow shaft of the I/115TC?
Since it is a hollow shaft, concentricity is critical to prevent vibrations at high speeds. It is recommended to ensure a maximum radial shaft load of 18 kg and verify that the starting torque does not exceed 90-120 gcm to protect the sealed bearings during initial movement.
What connectors and output options are available for the I/115TC?
The model supports NPN, PNP, Open Collector, or Push-Pull PRO output configurations. For connections, IP65/IP66 terminal blocks and specific connectors such as VD (7-pin), VH (12-pin), or VM (sub D) are available, allowing the output to be adapted to the existing control system.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Speed/position measurement with hollow shaft |
| Feeding | 5÷30V (±5%) |
| Axis | Hole Ø 16mm Stainless Steel |
| Weight | 1650 g |
| Maximum Load per Axle/Radial | 18 kg |
| Max. Continuous RPM | 6000 rpm |
| Starting Torque | 90-120 gcm |
| Bearing Life | 1.5 x 10^9 turns |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Temperament Function | 0 ÷ 70 °C |
| Temperament Storage | -30 to 85 °C |
| Number of Impulses/Revolution | 1 ÷ 3600 pulses |
| Maximum Frequency | 100 kHz (option 160) |
| IP protection | IP64/66 depending on version |
Other products
