AQUA LUX-xxx Family

Luminosity sensors (lux meters) for industrial and home automation use

AQUA LUX, Luminosity sensor (luxmeter) in IP65 waterproof field housing
AQUA LUX-42R, Luminosity sensor (luxmeter) in field box with relay output and 4/20mA
AQUA LUX-VR, Luminosity sensor (luxmeter) in field box with relay output and 0/10V
AQUA LUX-REGU, Automatic brightness regulator in field box with light setpoint
AQUA LUX-REGU-230, Automatic dimmer in field box with light setpoint, power supply: 230VAC (±15%) isolated

Properties

Other products

Quadrupler – potentiometer signal isolator, potentiometer input, isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø59, hollow shaft Ø15 F7 | Elastic coupling | Up to 65536 steps (16 bits) | SSI, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary
Quadrupler – signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated
Converter that generates an adjustable slope ramp Input 0/+-10 Vdc / Output 0/+-10 Vdc Power supply 24VDC (20.. 30V), 115/230VAC-DC (100.. 250V) isolated Suitable for soft starts, hydraulic drives
Quadrupler – 4/20mA signal isolator (with excitation) 4/20mA input, excitation (15V/20mA) isolated 4 x 4/20mA isolated output (Active / Passive) + 4 x 0/10V, with power supply regulation adjustment: 24.. 230VAC-DC (±15%) isolated
Quadrupler – 0/10V signal isolator (with excitation), 4-way isolation, 4 0/10V outputs. Power supply: 24VDC (20.. 30V)
Quadrupler – 4/20mA signal isolator (with excitation), 4-way isolation, 4 4/20mA outputs (active). Power supply: 24VDC (20.. 30V)
Voltage limiter with adjustable limit input: 0/10V isolated output: 0/10V limited by adjustable front interior power supply 24.. 230VAC-DC (±15%) isolated
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 V max. | IP67 | M12 connector or cable

Request a quote or technical information

Please tell us the quantity you need to measure, the range, the accuracy, the output signal, or any other requirements of your application.

We will help you select the right equipment and send you a quote or technical documentation.

You can also contact us by phone:

91 764 21 00

Shopping Basket