RSG Second Class Pyranometer
- Manufacturer: Nesa
- Category: Meteorology – Climatology, Solar radiation - Light, SENSORS
El NESA RSG es un piranómetro de termopila de segunda clase (clase C) según ISO 9060 para la medida de la radiación solar global entre 0,3 y 3 µm con respuesta en coseno. Conforme a WMO para la monitorización ambiental y apto para aplicaciones fotovoltaicas (ISO 9060 e ISO/IEC 17025).
Rango hasta 2000 W/m², sensibilidad típica de 10 µV/(W/m²), offset de cero < 20 W/m² y tiempo de respuesta < 25 s. Salida natural en µV, 0÷2Vdc, 4÷20mA o RS485 / Modbus; cuerpo de aluminio IP67 para climas cálidos y fríos.
Key points
- Clase C según ISO 9060; conforme a WMO
- 0 ÷ 2000 W/m², 0.3 ÷ 3 µm, 10 µV/(W/m²)
- Offset de cero < 20 W/m² (a 200 W/m²), estabilidad < ±2 % al año
- Outputs µV, 0÷2Vdc, 4÷20mA or RS485 / Modbus (ID 003)
- Aluminio anodizado, IP67, -40 ÷ +80 °C, < 600 g
Technical Frequently Asked Questions
¿Qué salidas tiene el piranómetro RSG?
RSG-N: natural de la termopila, 10 µV/(W/m²). RSG-A: 0÷2Vdc = 0…2000 W/m². RSG-B: 4÷20mA = 0…2000 W/m², no alimentada por el lazo. RSG-C: RS485 / Modbus RTU (9600 baud, N, 8, 1; función 0x03; registros 40002 – 40003; ID estándar 003).
¿Para qué aplicaciones sirve?
NESA lo indica para la monitorización ambiental conforme a WMO y para aplicaciones fotovoltaicas (ISO 9060 e ISO/IEC 17025).
How do I order it?
Sensor (RSG), salida (A, B, C o N), cable sensor-datalogger (05, 10 o xx, longitud en metros a especificar) y soporte SSU de L = 700-750 mm. Ejemplo del fabricante: RSG B 10 SSU.
Properties
| Feature | Specification |
|---|---|
| Measurement and operating principle | |
| Measured magnitude | Radiación solar global (respuesta en coseno) |
| Range | Máx. 2000 W/m² salida natural; 0 ÷ 2000 W/m² salida normalizada |
| Spectral range | 0.3 µm ÷ 3 µm |
| Typical sensitivity | 10 µV/(W/m²) over 2π sr |
| Señal de salida típica | 10 mV/(kW/m²) |
| Resolution | < 8 W/m² |
| Response time | < 25 s |
| Zero offset | < 20 W/m² (a 200 W/m²); < ±6 W/m² (ΔT = 5 K/h) |
| Estabilidad (1 año) | < ±2% |
| Cosine response | < ±22 W/m² |
| Temperature response (ΔT 50 K) | < 8 % |
| Nonlinearity | < ±2% |
| Response to tilt (0 – 90°) | < ±4 % |
| Expected daily uncertainty | < 10 % |
| Transducer | Thermopyle |
| Classification | Segunda clase (clase C) según ISO 9060 |
| Regulatory compliance | ISO 9060; WMO; CE |
| Output signals and interface | |
| Output (version N) | 10 µV/(W/m²), natural de la termopila |
| Output (version A) | 0÷2Vdc = 0…2000 W/m² |
| Output (version B) | 4÷20mA = 0…2000 W/m², not powered by the loop |
| Output (version C) | RS485 / Modbus RTU (Half duplex); Standard ID 003; 9600 baud, N, 8, 1; Function 0x03; Registers 40002 – 40003 (IEEE754 32 bits) |
| Output impedance | < 40 Ω |
| Power supply, environment, and mechanical data | |
| Food and consumption | Self-powered in the N version; 10 ÷ 30Vdc < 0.1 W in the others |
| Protections | Contra inversión de polaridad y transitorios; descargador eléctrico |
| Operating conditions | -40 to +80 °C |
| Degree of protection | IP67 |
| Material | Anodized aluminum and stainless steel |
| Dimensions | 215 x 162 mm (ver plano) |
| Weight | < 600 g |
| Supply | Conector para soldar o cable con terminales; certificado de calibración y constante instrumental |
| Reference | Configuration |
|---|---|
| RSG-ARSGA | Model: RSG · Output signal: 0÷2Vdc · Supplied with: Calibration report |
| RSG-BRSGB | Model: RSG · Output signal: 4÷20mA · Supplied with: Calibration report |
| RSG-CRSGC | Model: RSG · Output signal: RS485 / Modbus (Standard ID 003) · Supplied with: Calibration report |
| RSG-NRSGN | Model: RSG · Output signal: Natural in µV (10 µV/(W/m²)) · Supply: With calibration report |


Related documentation, cases, and guides
Other products









