Net Radiometer RSN

Budget-friendly price Request a quote
µV, 0÷2Vdc, 4÷20mA, RS485/Modbus | ± 2000 W/m² | 0.2 ÷ 110 µm | Thermopile | 510x60mm | <500g

El NESA RSN es un radiómetro neto de termopila que mide la diferencia entre la radiación solar global (directa + difusa) y la reflejada por el suelo, en el espectro de 0,2 a 110 µm. Conforme a WMO para la monitorización ambiental, sirve para el cálculo de la evaporación (algoritmo de Penman-Monteith).

Campo de medida típico de ± 2000 W/m² con salida natural (−500 ÷ 1500 W/m² con salidas 0÷2Vdc, 4÷20mA y RS485 / Modbus), sensibilidad de 10 µV/(W/m²) y precisión de ± 10 W/m². Teflón, aluminio anodizado y acero inoxidable; < 500 g.

Key points

  • Radiación neta: global – reflejada
  • ± 2000 W/m² (salida N); −500 ÷ 1500 W/m² (A, B y C)
  • 0,2 ÷ 110 µm, 10 µV/(W/m²), precisión ± 10 W/m²
  • Salidas µV, 0÷2Vdc, 4÷20mA o RS485 / Modbus (ID 011)
  • Cálculo de la evaporación (Penman-Monteith); conforme a WMO

Technical Frequently Asked Questions

¿Qué mide el radiómetro neto RSN?

La diferencia entre la radiación global del sol (directa + difusa) y la reflejada por el suelo, con una termopila de uniones calientes arriba y frías abajo.

¿Qué salidas y rangos tiene?

RSN-N: natural, ±20 mV para ± 2000 W/m². RSN-A: 0÷2Vdc, RSN-B: 4÷20mA y RSN-C: RS485 / Modbus (ID estándar 011), las tres para −500 ÷ 1500 W/m².

How do I order it?

Sensor (RSN), salida (A, B, C o N), cable sensor-datalogger (05, 10 o xx, longitud en metros a especificar) y soporte (SS1 de l = 500 mm, SS2 de l = 1500 mm o SS3 de l = 900 mm). Ejemplo del fabricante: RSN A 10 SS2.

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeRadiación solar neta (global – reflejada)
Typical measurement range± 2000 W/m² (salida N); −500 ÷ 1500 W/m² (salidas 0÷2Vdc, 4÷20mA y RS485/Modbus)
Spectral range0,2 µm ÷ 110 µm
Typical sensitivity10 µV/(W/m²)
Typical output constant10 mV/(kW/m²)
Precision± 10 W/m²
TransducerThermopyle
Regulatory complianceWMO
Output signals and interface
Output (version N)10 µV/(W/m²), direct from thermopile
Output (version A)0÷2Vdc
Output (version B)4÷20mA
Output (version C)RS485 / Modbus; ID estándar 011
Output impedance< 5 Ω
CalibrationPor comparación con instrumento certificado como patrón primario de la WMO; se entrega con certificado de calibración
Power supply, environment, and mechanical data
Food and consumptionSelf-powered in the N version; 10 ÷ 30Vdc < 0.1 W in the others
ProtectionsContra cortocircuitos y descargas atmosféricas; inversión de polaridad y transitorios
Operating conditions-40 to +80 °C
MaterialTeflón, aluminio anodizado y tornillería de acero inoxidable
Dimensions510 x 60 mm (ver plano)
Weight< 500 g
ReferenceConfiguration
RSN-ARSNAModel: RSN · Output signal: 0÷2Vdc · Range: −500 ÷ 1500 W/m² · Supplied with: Calibration report
RSN-BRSNBModel: RSN · Output signal: 4÷20mA · Range: −500 ÷ 1500 W/m² · Supplied with: Calibration report
RSN-CRSNCModel: RSN · Output signal: RS485 / Modbus (Standard ID 011) · Range: −500 ÷ 1500 W/m² · Supplied with: Calibration report
RSN-NRSNNModel: RSN · Output signal: Natural, ±20 mV · Range: ± 2000 W/m² · Supplied with: Calibration report
NESA Net Radiometer RSN
Dimensiones y conexiones del radiómetro neto RSN de NESA

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58 mm | Shaft Ø10 h7 stainless steel | 1 to 25000 pulses/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft, IP66 sealed | Radial/axial load 4 kg
DPF Sensors logo
CO2, humidity and temperature sensor, for OUTDOORS, with ModBus RS485 communication
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Contactless, separate actuator | Hollow shaft Ø4, 5, 6, 8 or 10 mm | 8 to 2048 pulses/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP67 shaft | 30000 rpm, 1 MHz
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø8 h7 shaft | 63.5 mm square flange | 1 to 1000 imp/rev | NPN, PNP, push-pull or driver | 5–30 V power supply | IP64 shaft (IP66 Z-seal) | 40 kHz (75 kHz optional)
NESA Environmental Meters
K-band radar <25GHz | 0÷20 m | 0.01% fs (±2 mm) | 4÷20mA | Current loop or 10÷28 Vdc | IP66 – IP68 (0.2 bar) | 285 x 72 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | Ø 36mm | Resolution 16 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | 2 to 16 turns (up to 5760°)
Monitran-Logo
100 mV/g ±10 % | 2 Hz to 10 kHz ±5 % | ±80 g | -55 to 140 °C (IP67) | IP67 or IP68 (100 m max.) | Top or side entry, with connector or cable
Dimetix_AG-1
Up to 100 m over natural surfaces and up to 500 m with reflector, typical accuracy of ±1 mm @2σ (±0.5 mm @1σ), and measurement frequency up to 100 Hz.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6 or Ø8 mm | Housing Ø46.5 mm | 1 to 5000 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Tangential coupling
Monitran-Logo
Para las versiones con conector del acelerómetro 1186 | Toma 62GB de 3 pines a extremos libres | PVC de cuatro conductores más pantalla con sobremalla | 5 m
Shopping Basket