DPK-401

Budget-friendly price Request a quote
Optical rain sensor

The DPK401 rain gauge detects the amount of rain falling on its outer surface using infrared light beams.

RS485 signal output

Measurement resolution 0.1mm, accuracy ±5%

Properties

Other products

DPF Sensors logo
Junction box for 4 load cells. IP67 field enclosure. For cells with the same impedance, without individual adjustment.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 50…900 mm | Resolution < 0.01mm | M6 stem | 42VDC | IP55 | 10m/s
Monitran-Logo
Linear Range 0-5mm | Sensitivity 4mV/µm | AISI 4140 Stainless Steel | Probe -30 to 180°C | Driver -20 to 80°C | M16 x 1 Thread | Frequency DC-10kHz | Linearity <1% | PEEK Tip | PTFE Cable
DPF Sensors logo
Safety tilt controller for platforms.
DPF Sensors logo
Insulated thermocouple duplicator J, K, T, E, N, R, S, B – To connect 2 systems to a single thermocouple
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Mounting feet | Stainless steel Ø10 shaft | 10 to 3600 pulses/rev | Max. frequency 180 kHz | NPN, open collector, push-pull | Power supply 5–24 V | IP52 shaft, IP64/IP65 output
DPF Sensors logo
Isolated multiplexer with 4 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity range from 4 to 2,000 mS/cm and TDS (total dissolved solids) from 10ppt to 1,000ppt 4…20mA and Modbus output
DPF Sensors logo
Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, built-in data logger + display.
DPF Sensors logo
Isolator-converter input: 0/1500VDC to isolated output 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated. Solar Panels
Shopping Basket