Monitran MTN/1830 Low Profile IEPE Accelerometer

Budget-friendly price Request a quote
Low-profile side outlet | Constant current 0.5 to 8 mA | 100 mV/g ±10% at 80 Hz | 2 Hz to 9 kHz ±5% | -25 to 125 °C | Stainless steel | IP67

The Monitran MTN/1830 is a general-purpose, low-profile, side-exit, constant-current accelerometer with isolated AC output. It has a nominal sensitivity of 100 mV/g ±10% at 80 Hz and a frequency response of 2 Hz to 9 kHz ±5% (−3 dB at 0.8 Hz), with a supply current of 0.5 mA to 8 mA and a nominal bias voltage of 12 V DC.

It is manufactured entirely from stainless steel and IP67 rated, with an integral ETFE cable featuring stainless steel overbraiding (5 m standard, 100 m maximum). The product information indicates a ¼" mounting bolt, M6 or M8 in the presentation text, and M6 x 25 mm or M8 x 25 mm in the technical data sheet. Guemisa is an official distributor of Monitran in Spain.

Key points

  • Frequency response from 2 Hz to 9 kHz ±5%, with nominal 18 kHz mounted base resonance and 500 g shock limit
  • Transverse sensitivity less than 5% and electrical noise of 0.1 mg max., with isolated base
  • Temperature range -25 to 125 °C, IP67 rating and nominal weight of 110 g

Technical Frequently Asked Questions

What is the sensitivity and frequency response of the Monitran MTN/1830?

Sensitivity of 100 mV/g ±10% nominal at 80 Hz and frequency response of 2 Hz to 9 kHz ±5% (−3 dB at 0.8 Hz), with base mounted resonance of 18 kHz nominal.

What kind of food does the MTN/1830 need?

It is a constant current source: current range of 0.5 mA to 8 mA and nominal bias voltage of 12 V DC. The schematic on the datasheet shows a constant current source with a +18 to 30 V input.

What temperature, protection, and cable does it have?

Operating temperature from -25 to 125 °C, IP67 sealed, stainless steel housing and integral ETFE cable with stainless steel overbraiding, 5 m standard and 100 m maximum.

Properties

FeatureSpecification
Measure and signal
Sensitivity100 mV/g ±10% nominal at 80 Hz
Frequency response2 Hz to 9 kHz ±5% (−3 dB at 0.8 Hz)
Mounted base resonance18 kHz (nominal)
Cross-sectional sensitivityLess than 5%
Electrical noise0.1 mg max.
IsolationIsolated from the base
Crash limit500 g
Food and environment
Current range0.5 mA to 8 mA
Polarization voltage12 V DC (nominal)
Operating temperature-25 to 125 °C
SealedIP67
Housing materialStainless steel
Mechanics and connection
WireIntegral ETFE with stainless steel overbraid
Standard cable length5 meters
Maximum cable length100 meters
Mounting bolt suppliedM6 x 25 mm or M8 x 25 mm
Tightening torque8 Nm
Dimensions (according to plan)50 x 19 x 30 mm; Ø6.35 mm at the cable outlet; through hole Ø8.2 or Ø6.4 mm
Weight110 g (nominal)
ReferenceConfiguration
MTN/1830 MTN1830Low-profile, side-exit accelerometer; M6 x 25 mm or M8 x 25 mm mounting bolt Technical data sheet MTN/1830 (PDF)
IEPE low-profile side-exit accelerometer Monitran MTN/1830
Dimensioned drawing and connection diagram of the Monitran MTN/1830 accelerometer

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Double housing, B10 flange Ø115 | Shaft Ø11 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP66 shaft (IP67 sealed) | Gray, Binary, Excess or BCD
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 1.35 mm, 4 m/s | Race 10, 15, 20, 25 or 30 m | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder and mechanics
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | Ø 36mm | Resolution 12 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | Up to 360°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø48 mm | 1 to 2540 imp/rev | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Helical, optional flanges
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø40 mm | Solid shaft Ø6 mm (Ø8 optional) | 10–2500 impedances/revolution | NPN, push-pull, line driver | 5 V ±5 % or 12–24 V | IP52 shaft (IP65 output with cable) | Max. frequency 180 kHz
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Measuring range 0-4,000/40,00/400,0 Nephelometric method (USEPA 180.1) with 2200 K tungsten lamp. Lamp life 100,000h
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output to Ub | Ø 79 mm | Shaft Ø 13 mm or Ø 10 mm | Ub max. 42V | IP67 / IP6K9K | 120°, 200° or 350°, 1 or 2 channels
NESA Environmental Meters
Dry and wet deposits | 2004/107/EC | Relay contacts | 220Vac or 20W solar panel | -30 ÷ +70°C | 750x550x330mm + 1m pole
Shopping Basket