CANopen threaded flange magnetostrictive transducer TM1

Budget-friendly price Request a quote
Magnetostrictive, non-contact | CANopen DS-406 | Stroke 50 … 2000 mm | Linearity ≤ ±0.04 % FS (min. 300 µm) | Resolution ≤ 0.1 mm | 12/24 VDC (8 … 34 VDC) | 350 bar · IP67

Novotechnik TM1 CANopen threaded flange transducer. NOVOSTRICTIVE technology, non-contact.

Absolute linear magnetostrictive transducer with stainless steel flange welded to the rod. Stroke from 50 to 2000 mm. Working pressure up to 350 bar. Passive annular position marker. Industrial and mobile application versions.

Key points

  • Working pressure up to 350 bar, peak pressure up to 450 bar
  • Unlimited mechanical life
  • No speed limit for the position marker
  • Absolute exit

Technical Frequently Asked Questions

What can be connected to the TM1 CANopen threaded flange transducer?

It can be connected to Novotechnik M12 connectors and cables and Novotechnik linear sensor positioners (magnets and cursors).

How do I order the TM1 CANopen threaded flange transducer?

The order code has six fields: stroke (mm), mechanical version, interface, parameters, speed, and connection. For example, TM1-0500-306-614-106 is the version with a 500 mm electrical range, M18x1.5 threaded flange, CANopen, 1x position and 1x speed, 250 kBaud, and a 5-pin M12x1 connector. All the options for each field are available in the order code configurator on this page.

Under what conditions does the TM1 CANopen threaded flange transducer operate?

Operating temperature: -40 … +105 °C. Protection: IP67.

Properties

FeatureSpecification
Description
FlangeStainless steel 1.4307 / AISI 304L
Flange coverAlSiMgBi
RodStainless steel 1.4571 / AISI 316Ti
WatertightnessNBR 90 SH A O-ring
Assembly, IndustrialScrewed in using M18x1.5 thread
Assembly, Mobile ApplicationsScrewed into the cylinder using an M18x1.5 socket for threaded plug hole according to ISO 6149
Electrical connection, IndustrialM12x1 connector, A encoding
Electrical connection, Mobile applicationsM12x1 connector, A encoding
Electrical data
Measured variablesPosition, speed, and temperature
Electrical range (L dimension)0 … 50 mm up to 0 … 2000 mm
Speed measurement range25 … 1000 mm/s
ProtocolCANopen according to CiA DS-301 V4.2.0
Device profileDS-406 V3.2, Class C2 encoder
LSS Servicesaccording to CiA DS-305 V1.1.2
Programmable parametersPosition, speed, cams, working areas, temperature, node ID, transmission speed
Node ID1 … 127 (default 127)
Transmission speed50 … 1000 kBaud
Update frequency (output)1 kHz (internal measurement frequency 0.5 kHz)
Absolute linearity≤ ±0.04 % FS (min. 300 µm)
Electrical zero point tolerance±1 mm
Position resolution≤ 0.1 mm
Speed resolution2 mm/s
Repeatability≤ ±0.1 mm
Hysteresis≤ ±0.1 mm
Temperature error≤ ±15 ppm/K (min. 0.01 mm/K)
Supply voltage Ub12/24 VDC (8 … 34 VDC)
Power supply voltage ripple≤ 10 % Ub
No-load consumption< 1.5 W
Overvoltage protection40 VDC (6 s)
Reverse polarity protectionYes (power lines and outlets)
Short circuit protectionYes (all outputs connected to GND and the supply voltage)
Insulation resistance (500 VDC)≥ 10 MΩ
Internal bus terminationNo (120 Ω internal load resistance, on request)
Environmental conditions
Maximum working speedMechanically unlimited
Vibration IEC 60068-2-620 g, 10 … 2000 Hz, Amax = 0.75 mm
IEC 60068-2-27 Shock100 g, 11 ms (one stroke)
DIN EN 60529 protectionIP67
Working temperature-40 … +105 °C
Working humidity0 … 95 % HR (non-condensing)
Working pressure≤ 350 bar
Pressure spikes≤ 450 bar
Bursting pressure> 700 bar
LifeMechanically unlimited
MTTF (IEC 60050)391 years
TraceabilitySerial number on the label: production batch of the sensor assembly and its components
EMC, Industrial version
EN 61000-4-2 ESD, discharge by contact4 kV
EN 61000-4-2 ESD, air discharge8 kV
EN 61000-4-3 Electromagnetic fields (RFI)10 V/m
EN 61000-4-4 Fast transients (burst)1 kV
EN 61000-4-6 Conducted disturbances (HF fields)10 V ef.
EN 55016-2-3 Radiated disturbancesIndustrial and residential area
Connection assignment
SignConnector, code 106
Supply voltage UbPin 2
GNDPin 3
CAN_HPin 4
CAN_LPin 5
Do not connect, IndustrialPin 1
Unassigned, Mobile ApplicationsPin 1
EMC, Mobile Applications version
ISO 10605 ESD (handling)8 kV
ISO 10605 ESD (component)15 kV
ISO 11452-2 Radiated HF fields100 V/m
ISO 11452-4 BCI (mass current injection)200 mA
CISPR 25 Radiated emissionLevel 4
ISO 7637-2 Transient emissionsLevel 1/2
ISO 7637-2 Pulses on the feed lines (1, 2a, 2b, 3a, 3b)Level 4
ISO 7637-3 Pulses on output lines (3a, 3b)Fast Level 2
ISO 16750 Pulses on power lines, startup profileLevel 4 with 12V; Level 3 with 24V
ISO 16750 Pulses on power lines, Load dump A+200 V
EN 13309 Construction machineryEmission and disturbance resistance: exceeds E1 requirements
ISO 14982 Agricultural and forestry machineryEmission and disturbance resistance: exceeds E1 requirements
OptionMeaning
Example: TM1-0500-306-614-106 = 500 mm electrical range, M18x1.5 threaded flange, CANopen, 1x position and 1x speed, 250 kBaud and 5-pole M12x1 connector.
1. Electrical range (mm)
0050 … 2000Standard, 25 mm increments; other lengths available upon request
2 · Mechanical version
306M18x1.5 threaded flange
308M18x1.5 threaded flange with M4x6 internal thread at the rod end (7.5 mm longer)
3 · Electrical interface
6CANopen
4 · Interface parameters
11x position, 1x speed
5 · Transmission speed
11000 kBaud
2800 kBaud
3500 kBaud
4250 kBaud
5125 kBaud
750 kBaud
6. Electrical connection
106M12x1 connector, 5 poles
The code is formed using one option from each field, in the order shown in the example. Contact us and we will confirm the exact reference.
Novotechnik TM1 CANopen threaded flange magnetostrictive transducer
Dimensional drawing CANopen Novotechnik TM1 threaded flange magnetostrictive transducer

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø8 h7 shaft | 63.5 mm square flange | 1 to 1000 imp/rev | NPN, PNP, push-pull or driver | 5–30 V power supply | IP64 shaft (IP66 Z-seal) | 40 kHz (75 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Through shaft Ø75, 90, 100, 110, 125 | Housing Ø250 mm | 400, 420 … 2304 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP54 shaft side | Internal tangential coupling
Disibeint Electronic, manufacturer of level sensors and control relays
FLOAT LEVEL SWITCH
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.9 mm, 8 m/s | Stroke up to 2000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)
Monitran-Logo
Industrial eddy current probe | Linear range 0 – 5 mm | Sensitivity 3.6 mV/µm nominal | DC to 10 kHz | EP200: M16 thread, Ø13 mm | EP200F: PEEK housing | -30 °C to 180 °C (probe)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø63, shaft Ø9.52 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Push-pull option 70 mA + PTC
DPF Sensors logo
Industrial resistive displacement sensor, range from 50 mm to 1250 mm
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 3000 N·m | 16,000 RPM | PCD Flange 130.0 mm | Accuracy 0.05% | Inertia 0.0092 kg·m²
DPF Sensors logo
TDC, digital MEMS dynamic tilt sensor, can measure (roll ±180°, pitch ±180°, and azimuth ±180°) of a moving object. RS485 output signal. Withstands vibrations up to 2000g
Shopping Basket