IMNE

Budget-friendly price Request a quote
FLOAT LEVEL SWITCH
Switch to control a maximum and minimum level in a liquid filling or emptying process.

Properties

  • Maximum and/or minimum control
  • For clean and waste water without crust formation
  • Made of PE
  • SPDT Microswitch 10 A / 250 VAC
    +60 ºC. 5 kg/cm². IP68
  • 2, 5 and 10 METRE CABLE

Other products

FUEL FLOW METERS
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6, 8, 10, 12 or 15 H7 | Housing Ø59 mm | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | Tangential, collar mounting
ATESTEO LOGO, manufacturer of torque sensors
Dual Inductive Metrology | Limit 500 N·m | 21,000 RPM | PCD Flange 84.0 mm | Accuracy 0.04% | Inertia 0.0017 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø78, insulated hollow shaft | Ø12, Ø15, Ø20 or Ø25 mm H7 | Insulated elastic coupling | Up to 8192 steps (13 bits) | Parallel or SSI | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed)
ATESTEO LOGO, manufacturer of torque sensors
High-Speed Telemetry (Optical) | Range 50 – 100 N·m | Peak 40,000 RPM | Dual PCD Flange 66.0/44.0 mm | Inertia 0.0003 kg·m²
DPF Sensors logo
Miniature size wire displacement sensor, ranges from 100 to 350 mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Magnetostrictive | Stroke 50 … 4250 mm | IO-Link V1.1, COM 3 | Resolution 1 or 5 µm | 1 to 3 position markers | 18 … 30 VDC | IP67 / IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
38 mm square flange | Shaft Ø6.35 h7, centered Ø17.46 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP64 shaft (IP66 sealed) | 60 kHz (100 kHz optional)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
DeviceNet (D2), programmable speed | Square flange □63.5 mm | Shaft Ø10 h8 | 16 bit; 30 bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)
Monitran-Logo
Triaxial Measurement (X, Y, Z) | High Temperature 250°C | Sensitivity 5pC/g | Frequency 1Hz-30kHz | Range ±2000g | Load Output (pC) | No Electronics in Head | Stainless Steel | 4-Point M3 Mounting | Integral 4-Core Cable
Shopping Basket