IKTC
Industrial resistive displacement sensor, range from 50 mm to 1250 mm
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS, Potentiometric linear sensors
Industrial resistive displacement sensor, range from 50 mm to 1250 mm
With a linearity of 0.1% and a useful life of 40 million maneuvers
2 and 5 Kohm resistance, depending on range, with solenoid valve type connector, very robust model.
Properties
Other products
Power supply 5-30V | Aluminum base | Valox 420 cover | Weight 290 g | Hollow stainless steel shaft Ø6-15 mm | Maximum load 6 kg | IP rating (outlet side) 65 | Bearing life 1.5 x 10⁹ revs | Maximum frequency 100 kHz | Temperature 0 to 60 °C
Top Input | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Insulated Base | 2-pin Connector Mil-C-5015
2-channel encoder isolator-amplifier-duplicator-adapter. Up to 1 MHz (adapts differential signals to single-ended signals).
Hollow Stainless Steel Shaft | Aluminum Base | Valox 420 Cap | Weight 290g | Maximum Load 6kg | Continuous RPM 3000 | Starting Torque 60gcm | Bearing Life 1.5×10^9 Rev | Impact Resistance 50G | Shaft Side IP Rating 65
Precision tilt sensor with ranges from ±1…90º, 2 axes, output signal 4-20mA / 0-5 Vdc / RS485 / CanBus, ACCURACY: ±0.005º, RESOLUTION: 0.001º
Three-phase network analyzer with indication, RS485, 3 x /5A input – 3 x 550VAC
Multiplexer for 4 or 8 3-wire Pt100 or Pt1000 probes at the output of the same probe
Inductive Differential | Ranges 24 mm to 360 mm | Frequency 10 kHz | 30.0 mm PCD Flange (Support) | Housing Ø 10/12 mm | IP68 / M12 Optional
Compact digital pressure gauge, 31 and 300 bar, with MIN/MAX display