SI315.1 TOROIDAL CONDUCTIVITY SENSOR

ST315, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Conductivity Sensors

The ST 315.21 toroidal conductivity sensor from B&C Electronics is an advanced solution for accurate conductivity measurement in industrial liquids. Its electrodeless technology, based on toroidal coils, eliminates common problems such as electrode contamination and polarization, ensuring reliable measurements even under demanding conditions.
Designed for submersible installations (IP68) and constructed of durable PVC, this sensor withstands corrosive liquids and harsh conditions. It incorporates a Pt100 temperature sensor for thermal compensation and a model 080315 microtransmitter, optimizing signal transmission. It operates at temperatures up to 40°C and pressures up to 3 bar at 25°C, making it ideal for immersion applications.
It is fully compatible with the C 565.2 and C 7685 controllers and comes with optional accessories such as the SZ 9481 (10 m) and SZ 9483 (30 m) cables with IP67 connectors. ISO 9001:2015 certified, this sensor stands for quality and durability in industrial conductivity measurement.

Properties

Measuring range:	From 0 to 2,000 mS
Body material:	PVC
Temperature coefficient:	0.3%/ºC
Size:	167mm Length X Ø33.2
Maximum working temperature:	40ºC
Electrical connection:	3m 5-wire coaxial cable
Protection	IP68 (submersible)
Controllers	C7685 and C565.2
Maximum working pressure:	3Bar

Other products

Robust Incremental Encoder I/90

Carcasa Ø90 mm, brida servo | Eje Ø10 h7 inoxidable | 1 a 25000 imp/vuelta | NPN, PNP, push-pull, driver, 1 Vpp | Alimentación 5–30 V | IP65 eje (IP66 sellado) | 100 kHz (300 kHz opcional)

Encoder, Incremental Encoder, Robust Incremental Encoder, SENSORS

M45NC Incremental Magnetic Encoder

Sin contacto, carcasa 45×45 mm | Eje hueco Ø4–10 mm con imán | 8 a 2048 imp/giro | Line driver 26LS31/ET7272, NPN | Alim. 5, 8–24, 18–28, 10–30, 5–30 V | IP67 eje | 30000 rpm, 600 kHz

Encoder, Incremental Encoder, Incremental Magnetic Encoder, SENSORS

Torsor DF5 Plus Torque Sensor 10,000 Nm | 12,000 RPM | Class 0.04 Accuracy

Inductive (Dual-Frequency) | 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

B&C SZ165 pH Sensor

B&C SZ165 pH sensor with 9m cable, combined glass/reference electrode for general pH measurement in industrial processes and instrumentation.

Water quality, SENSORS, pH and Redox Probes

Steering Wheel Torque Sensor 50-400 Nm | Dynamic Steering Angle | Road-Drive Test

Driving Telemetry | Stepped Range 50 – 400 N·m | Class Accuracy ±0.10% | Analog Output ±10V | 16-Bit Resolution

Accessories, Torque sensor

Torque Transducer DF Ibex 1 | 500 Nm | 21,000 RPM | Split Ring Stator

Transverse Inductive Measurement | 500 N·m | 21,000 RPM maximum | Strict PCD flange 84.0 mm | Overall resolution 0.02% | Ultra-low inertia 0.0017 kg·m²

Half torque (100-1,000 Nm), Rotary, Torque sensor

Incremental Encoder for I/90CBB Motors

Hollow shaft Ø12–25 mm insulated | Housing Ø90 mm | 1 to 18000 impedances/revolution | NPN, PNP, push-pull, line driver | Power supply 5–30 V | IP65 shaft (IP66 sealed) | Elastic, compensates ±2 mm axial

Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS

Intrinsically Safe Velocity Transducer Monitran MTN/2285

Top Outlet | Intrinsically Safe ATEX/IECEx | 4-20mA DC Output | RMS Speed Measurement | Configurable Range | Frequency 2Hz-1kHz | Power Supply 12-32V DC | Temperature -55 to 90°C | IP67 Protection | Stainless Steel | M12 Connector

Accelerometers and Vibration Sensors, Amplified, ATEX, SENSORS

A/958HD Absolute Fieldbus Encoder

DeviceNet (D2), programmable speed | Housing Ø58 mm, servo mounting | Shaft Ø10 h8 (Ø6 optional) | 16 bit; 30 bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)

Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS

Incremental Encoder with Centrifugal Relay I/115TB

Mecánico incorporado, IP54 | Brida B10 Ø115 mm | Carcasa Ø96 mm, eje Ø11 h7 | 1 a 3600 imp/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP64 eje (IP66 con opción Z)

Encoder, Incremental Encoder, Incremental Encoder with Tachometric Dynamo, Robust Incremental Encoder, SENSORS