ST315.21 conductivity sensor
Budget-friendly price Request a quote
ST315.21, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C
- Manufacturer: B&C Electronics
- Category: Water quality, SENSORS, Conductivity Sensors
B&C Electronics ST315.21 Toroidal Electrical Conductivity Sensor. Measures conductivity in liquids using toroidal coils, without electrodes, thus eliminating electrode contamination and polarization.
Submersible installation, IP68 protection. PVC body. Maximum working temperature: 40 °C. Maximum pressure: 3 bar at 25 °C.
It incorporates a Pt100 temperature sensor for thermal compensation and a model 080315 microtransmitter.
Compatible with C565.2 and C7685 controllers. Optional accessories: SZ9481 cable (10 m) and SZ9483 cable (30 m), both with IP67 connectors.
ISO 9001:2015 Certification.
Properties
| Measuring range: | From 0 to 2,000 mS |
| Body material: | PVC |
| Temperature coefficient: | 0.3%/ºC |
| Size: | 167mm Length X Ø33.2 |
| Maximum working temperature: | 40ºC |
| Electrical connection: | 3m 5-wire coaxial cable |
| Protection | IP68 (submersible) |
| Controllers | C7685 and C565.2 |
| Maximum working pressure: | 3Bar |
Related documentation, cases, and guides
Other products
For travel distances of a few meters and up to ~50 m, with typical accuracy of ±1 mm @2σ, 100 Hz and extended thermal range of -40 to +60 °C.
Spindle Ø14 h6, housing Ø170 mm | Centering Ø140 h6 | 18000–900000 impedances/revolution | Driver 26LS31 or 1 Vpp | 5 V ±5 % | IP64 spindle (IP65 output with cable) | ±2.5″; 2200 kHz with interpolation
CANopen | Ø 22 mm | 16 bits per revolution | Shaft Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP50 / IP65 | Measuring range: 44 revolutions (15840°)
DeviceNet (D2), programmable speed | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16-bit; 30-bit at 16384 revolutions | 10–30 V DC | IP64 shaft (IP66 sealed)
Linear Range 0-2mm | Sensitivity 8mV/µm | AISI 4140 Stainless Steel | Frequency DC-10kHz | Linearity 1% | Probe -30 to 180°C | Driver -20 to 80°C | Impedance <50Ω | PEEK Tip | PTFE Cable
Voltage output 0…URef | Ø 55 mm | 12 bits | Shaft Ø 6 mm | ±15 V | IP 65 | 360° no dead zone
Servo-type mounting | Shaft Ø10 h7 | 1 to 10000 impedances/revolution | NPN, PNP, push-pull, line driver | 5–30 V | IP65 shaft (IP66 sealed) | ATEX II 2 GD, Ex d IIC T6/T5
Indoor CO2, humidity and temperature sensor with ModBus RS485 communication
Hollow shaft Ø10, 12, 14, 15 or 20 mm | Housing Ø72 mm | 1 to 25000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP64 shaft (IP66 Z-seal) | Compensation ±3 mm axial, ±2°
Combined glass/gel reference pH electrode, epoxy body. 1.5m cable with BNC.