B&C Conductivity Sensor SZ3350.1

Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Conductivity Sensors

The B&C Electronics SZ 3350.1 conductivity sensor is a high-precision device designed for flow measurement in demanding industrial applications. Its construction with two AISI 316 stainless steel electrodes provides excellent chemical and mechanical resistance, ideal for monitoring conductivity in aggressive liquids.

This sensor features a cell constant K=0.1, making it suitable for measuring low conductivities, such as in ultrapure water, reverse osmosis, and pharmaceutical processes. It incorporates a two-wire Pt100 temperature sensor for thermal compensation, ensuring accurate and stable readings over a range of -5°C to 85°C.

Its 2" Tri-Clamp connection design allows for hygienic installation in sanitary and food processing systems. It also withstands a maximum pressure of 10 bar at 25°C, ensuring reliable performance in high-pressure environments.

Properties

Type of measurement

In flow (in flow)

Electrodes

2 electrodes of AISI 316 stainless steel

Temperature sensor

Pt100, 2 wires

Cell constant (K)

K = 0.1

Temperature range

-5°C to 85°C

Maximum pressure

10 bar at 25 °C

Body material

AISI 316

Process connection

Tri-Clamp 2”

Length of the submersible part

50 mm

Diameter of the submersible part

12.7 mm

Connector

Hirschmann

Compatibility

B&C Electronics Controllers

Other products

Torque Sensor DF Ibex 5 | 10,000 Nm | 12,000 RPM

Massive Inductive Metrology | Limit 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm | Accuracy 0.02% | Inertia 0.0470 kg·m²

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

SI308T CONDUCTIVITY SENSOR

For ultrapure water Cell content K=0.01cm-1 (0.2 to 20µS) Thread 1″ BSP, PVC body material, PT-100 for temperature measurement

Water quality, SENSORS, Conductivity Sensors

Replaceable Rear Cover for Dimetix Sensors

Multipurpose Blanking Plate for OEM Customization Range: Virgin chassis without pre-drilled holes (boreholes) for extreme industrial adaptations

Signal converters, Displacement, INSTRUMENTATION, SENSORS, Laser distance sensors, Level Sensors

LEO1

Digital pressure gauge

Data Logger, Pressure, SENSORS

SZ3300.1 conductivity sensor

Conductivity sensor range -5 to 85ºC, K=1

Water quality, SENSORS, Conductivity Sensors

Single-turn Absolute Encoder A/759UMA

Housing Ø59 mm | Stainless Steel Shaft Ø 6 – 15 mm | Operating Temp. -20 – +85 °C | Programmable Resolution: Grayscale or Binary | Max. Load 4 kg | Max. Frequency 500 kHz | Weight 340 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Programmable up to 65536 revolutions | SSI and RS422 Interface | Power Supply 10 to 30 V DC | Max. 4096 rpm continuous

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

Torsor F0iS Torque Sensor 50-100,000 Nm | 20,000 RPM | Extreme Torque and Structural Shielding

Strain Gauges (DMS) | 50 – 1,000 N·m | 20,000 RPM | PCD Flange 101.5 mm

Very high torque (10,000-150,000 Nm), Rotary, Torque sensor

Single-turn Absolute Encoder A/358HJ

Housing Ø58 mm | Shaft Stainless Steel | Operating Temp. 0 – +60 °C | Resolution 2 to 10 bits (4 to 1024 positions) | Max. Load 2 Kg | Max. Frequency 50 kHz | Weight 170 g | Vibration 12 G (10 – 2000 Hz) | Impacts 50 G x 11 ms | Power Supply 5V 15V 8÷24V | Protection IP65 | Bearing Life 15×10^9 Rev

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

DS4

ADZ NAGANO DS-4 electronic pressure switch

Pressure, SENSORS

Single-turn Absolute Encoder A/390

Housing Ø90 mm | Shaft Ø 8 mm / 12 / 12.7 mm Stainless Steel | Operating Temp. 0 – +70 °C | Resolution 2 to 14 bits (4 to 16384 positions) | Max. Load 5 Kg | Max. Frequency 25 kHz | Weight 700 g | Vibration 12 G (10 – 2000 Hz) | Impacts 40 G x 11 ms | Power Supply 5V to 30V | IP65 Output | Life 1.5×10^9 rev | Connection 26 pins

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS