Soil surface temperature sensor (SST)

Budget-friendly price Request a quote
Pt100 4-wire | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | WMO · EN 15518-3:2011 | 10÷30Vdc | 700g

The NESA SST is a soil temperature sensor with a Pt100 resistance temperature detector (RTD) sensing element, 1/3 DIN, with a four-wire connection. It is protected by shields against direct sunlight and UV radiation and features natural ventilation at ground level. It is manufactured in accordance with WMO standards and EN 15518-3:2011.

Typical measurement range -40 to +60°C, resolution 0.01°C, and accuracy DIN 43760 1/3 DIN (±0.1°C @ 0°C). Features a 4-wire Pt100 output; 0-2Vdc, 4-20mA, and RS485/Modbus outputs with external MCS interface. Supplied with calibration report and 10 m cable.

Key points

  • Typical measurement range -40 ÷ +60°C, resolution 0.01°C, response time <10 s
  • Accuracy DIN 43760 1/3 DIN (±0.1°C @ 0°C), ACCREDIA certifiable
  • 4-wire Pt100 1/3DIN (100Ω @ 0°C) natural output
  • With external MCS interface: 0÷2Vdc, 4÷20mA or RS485 / ModBus
  • Power supply 10÷30Vdc (typ. <0.1W, max. 2W@12Vdc mod. TAV)
  • Operating conditions -60°C ÷ +80°C, anodized aluminum, 700g

Technical Frequently Asked Questions

What temperature sensor does the SST use?

A Pt100 1/3DIN platinum resistance thermometer (100Ω@0°C) with four-wire connection, according to the response curve of the DIN 43760 standard.

How accurate is it?

DIN 43760 1/3 DIN (±0.1°C @ 0°C), ACCREDIA certifiable, with a resolution of 0.01°C.

What options does it offer?

Natural Pt100 output (N). With external MCS interface, 0÷2Vdc (A), 4÷20mA (B) or RS485 / ModBus (C).

Properties

FeatureSpecification
Measurement and operating principle
Measured magnitudeSoil temperature
Measurement principlePlatinum Pt100 1/3DIN (100Ω@0°C) resistance thermometer, sensitive to temperature variations according to the response curve of DIN 43760
Typical measurement range-40 to +60°C
Resolution0.01°C
PrecisionDIN 43760 1/3 DIN (±0.1°C @ 0°C), ACCREDIA certifiable
Response time<10 s
Transducer typePlatinum resistance thermometer 1/3 DIN
VentilationNatural
Regulatory complianceWMO; EN 15518-3:2011; CE
Exit signals
Output signal (N version)Pt100 1/3DIN (100Ω @ 0°C), 4 wires
With external MCS interface (optional)0÷2Vdc (A), 4÷20mA (B) or RS485 / ModBus (C)
CalibrationBy comparison with a certified Accredia standard instrument; delivered with a calibration report
Power supply, environment, and mechanical data
Feeding10÷30Vdc (typ. <0.1W, max. 2W@12Vdc TAV mod.)
Operating conditions-60°C ÷ +80°C
ProtectionsProtection against polarity reversal and lightning strikes
Building materialAnodized aluminum; stainless steel screws
Wire10m cable
DimensionsView map
Weight700g
ReferenceConfiguration
SSTSSTOutput: Pt100 4-wire · Supply: With calibration report and 10 m cable
NESA SST Soil Surface Temperature Sensor
Dimensions and connections of the NESA SST surface temperature sensor

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø38 mm, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)
Wall humidity and temperature sensor
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63.5 mm | B10 type flange (Ø115) | Ø11 h7 stainless steel shaft | 1 to 10000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed)
DPF Sensors logo
Industrial pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø58 mm, servo, shaft Ø6 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Length 120 mm
DPF Sensors logo
Humidity and temperature sensor for walls, ducts and exteriors
NESA Environmental Meters
2 x 4÷20mA, RS485/Modbus | 0 ÷ 90 m/s · 0 ÷ 360° | 4 ultrasonic cells | 162 x 320mm | 10÷30Vdc | IP65
NESA Environmental Meters
Dual wavelength NDIR | 0÷2000ppm or 0÷5000ppm | ±(20ppm+2% of measurement) | 4÷20mA or RS485 / ModBus | -25 ÷ +60°C | 120 g
LVDT Manufacturer Logo Schreiber Messtechnik
Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity
DPF Sensors logo
Flush diaphragm pressure transducer (supply)
Shopping Basket