A/MM58S Multi-turn Absolute Encoder

Budget-friendly price Request a quote
Flange Ø58 mm, servo, shaft Ø6 h7 | Up to 2²⁴ steps in 4096 turns | Gray or binary | Parallel NPN 70 mA or SSI RS422 | Power supply 5 ±5 %, 8–24 or 18–28 V | IP64 shaft (IP65 sealed) | Length 120 mm

The ELCIS MM58S (A/MM58S) is an optical multi-turn absolute encoder with a Ø58 mm flange and 120 mm length, up to 224 Steps in 4096 turns in Gray or binary code, with parallel NPN or SSI RS422 output. Servo-type mounting and IP65 protection with SM6 connector, with Ø6 h7 stainless steel shaft that supports 3 kg of radial/axial load, resistance to 50 G of impact and 12 G of vibration, and operation between 0 and +70 °C.

As an optical multi-turn absolute encoder, with LED source and phototransistors, the A/MM58S encodes the position in Gray or Binary, up to 224 Steps in 4096 turns. The reading is output via parallel interface, with Latch option, or via SSI serial interface (RS422) in Gray code.

It is fixed by means of a Ø58 mm servo type flange, with a Ø6 h7 stainless steel shaft that supports 3 kg of radial/axial load, and works between 0 and +70 °C with IP64 protection on the shaft side (IP65 in sealed version).

  • Resolution of up to 224 steps in 4096 laps (Gray/Binary).
  • Three power ranges: 5 V ±5 %, 8–24 V and 18–28 V.
  • NPN open collector or emitter output stages 70 mA with PTC.
  • Shock resistance of 50 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What resolutions does the A/MM58S offer?

In Gray and Binary, 16, 32, 64, 128, 256, 512, 1024, 2048 or 4096 steps per revolution and 16, 256 or 4096 revolutions, up to 224 steps. Other solutions available upon request.

Can the SSI interface be used with binary code?

No. The manufacturer states that the SSI serial output is only available with Gray code (or Excess). For binary, the parallel interface is used, where the Latch input is standard.

What connectors does it support and with what level of protection?

CM6 and SM6 32-pin (IP65/IP66), CL and SL 10-pin (IP65/IP66) and CH 12-pin (IP67), with radial (R) or axial output depending on the connector.

Properties

FeatureSpecification
Mechanics
Weight580 g
AxisØ6 h7 stainless steel (available sizes: Ø6, Ø8, Ø10, upon request) (customizable upon request)
max radial/axial load.3 kg
Electric
Exit-side protectionIP65 to IP67 according to connector
Feeding5 V ±5 % · 8–24 V · 18–28 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Direction of rotationSwitchable (up/down)
Exit codesGray (G), Binary (B)
Max resolution.2²⁴ in 4096 laps
Number of turns16, 256, 4096
Maximum frequency50 kHz
Protection and environment
axle-side protectionIP64 standard • IP65 sealed • IP53 low torque
max. continuous RPM4000 standard · 2000 sealed · 5000 low torque (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +70 °C / -30 … +85 °C
ReferenceConfiguration
A/MM58S2-G-256-1828-KP-L-CM6-RAMM58S2G2561828KPLCM6RNumber of turns: 2 · Gray code · 256 steps/turn · 18–28 V · NPN open emitter + PTC · Latch · 32 pins PT02A18-32P · IP65 · radial output
A/MM58S2-G-256-824-KP-L-CM6-RAMM58S2G256824KPLCM6RNumber of turns: 2 · Gray code · 256 steps/turn · 8–24 V · NPN open emitter + PTC · Latch · 32 pins PT02A18-32P · IP65 · radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/MM58S Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/MM58S multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Monitran-Logo
100 mV/g ±10% nominal at 80 Hz | 2 Hz to 10 kHz ±5% | ±80 g | Constant current 0.5 to 8 mA | Stainless steel, IP67 / IP68 | With or without temperature output 10 mV/°C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, centered Ø40 h7 | Shaft Ø10 h7 | 24 or 25 bit (12 + 12/13 bit) | SSI RS422, Gray code | 5 V ±10 % or 10–30 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63 mm, square flange | Shaft Ø9.52 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)
Disibeint Electronic, manufacturer of level sensors and control relays
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
DPF Sensors logo
Industrial resistive displacement sensor, range from 50 mm to 1250 mm
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø6–15 mm | Housing Ø59 mm | 1 to 25000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 Z-seal) | Tangential coupling
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø90, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
DPF Sensors logo
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
Monitran-Logo
Isolated IEPE output, 100 mV/g | 2 Hz to 10 kHz ±5 % | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | Ta −55 to +115 °C | Isolated electronics, stainless steel, IP67 | Group I (mining)
Monitran-Logo
Para las versiones con conector de los acelerómetros 1185, 1186 y 1187 | Toma 62GB de 3 pines a extremos libres | Cable de ETFE apantallado con sobremalla | 5 m
Shopping Basket