DPF160 Humidity and Temperature Sensor
Humidity and temperature sensor for walls, ducts and exteriors
- Manufacturer: DPF Sensors
- Category: SENSORS, Humidity Sensors
The DPF160 Humidity and Temperature Sensor is an advanced humidity and temperature sensor designed for demanding industrial and commercial applications. This device combines cutting-edge technology and durable materials to deliver accurate and reliable real-time measurements, ensuring optimal performance in challenging environments.
Properties
Range: Humidity: 5…98% / Temperature: -15..+65ºC
Power supply 15..35 Vdc / 24 Vac
For ventilation duct and exterior wall.
mA/Vcc output, RS485.
Very competitive price
Programmable range
EXIT SIGNAL: ![]()
![]()
![]()


Other products

Hilo Ø 0,9 mm, 8 m/s | Carrera hasta 2000 mm | Incremental, resolución 0,1 o 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V o pot. 1 kΩ | Alim. 5, 12, 24 V ±5 % o 8–30 V | IP64 codificador (mecánica IP53)

Eje Ø8 h7 | Brida cuadrada 63,5 mm | 1 a 1000 imp/vuelta | NPN, PNP, push-pull o driver | Alimentación 5–30 V | IP64 eje (IP66 sellado Z) | 40 kHz (75 kHz opcional)

Geotechnical monitoring system for structural monitoring and measurement of relative displacements in dams and large infrastructures.

Medición de par torsor, velocidad y sentido de giro | ±200 Nm | Salida 0–5 V | IP64 | Integración OEM para e-bikes

Salida potenciométrica | Carrera 50 … 750 mm | Linealidad ±0,04 … ±0,2 % | Resolución < 0,01 mm | 42 V máx. | IP67 | Conector M12 o cable

Resistive linear position sensor with spring probe • up to 200 mm • ±0.1 % FS

Through-shaft Ø30–50 H7 | Ø150 mm, anti-rotation pin | 1–90000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft | 100 kHz (300 kHz optional)

Square □45, Ø4 h7 shaft | Up to 256 steps (8 bits) | Parallel NPN open collector | 5 V ±5 % | IP64 shaft (IP65 sealed) | Gray, Excess or custom

Output 10-100mV/g | Frequency 2Hz-10kHz | Isolated AC Output | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Top Input | Insulated Base | Power Supply 15-28V | ETFE Cable

Range 2mS to 20S, For use in line with SZ724 adapter and C565.2 or C7685 controller.