SCO2 Carbon Dioxide Sensor

Budget-friendly price Request a quote
Dual wavelength NDIR | 0÷2000ppm or 0÷5000ppm | ±(20ppm+2% of measurement) | 4÷20mA or RS485 / ModBus | -25 ÷ +60°C | 120 g

The NESA SCO2 is a carbon dioxide sensor for monitoring air quality in environments with crowds and non-continuous flow: art galleries, museums, caves, auditoriums, schools, hospitals, greenhouses and animal breeding.

Dual-wavelength NDIR measurement system, typical measurement range 0–2000 ppm or 0–5000 ppm and accuracy ±(20 ppm + 2% of the measurement). Output 4–20 mA or RS485/Modbus. Each instrument is supplied with a calibration certificate.

Key points

  • Typical measurement range 0÷2000ppm or 0÷5000ppm; accuracy ±(20ppm+2% of measurement)
  • Response time <120s, stabilization time <15s; long-term stability 5% of field / 5 years
  • Salida 4÷20mA (RL<500 Ohm) o RS485 / ModBus RTU; salidas del borne CO2, Temp y Alarmaa
  • Power supply 12÷30Vdc; consumption <2W @ 24Vdc
  • Protections: against short circuits and overvoltage; polarity reversal and transients
  • Operating temperature -25 ÷ +60°C, IP21, indoor enclosure; ABS and stainless steel screws; 120g; CE

Technical Frequently Asked Questions

What is its measurement range and accuracy?

Typical measurement range 0÷2000ppm or 0÷5000ppm, with accuracy ±(20ppm+2% of the measurement).

What exits does it have?

4÷20mA (RL<500 Ohm) o RS485 / ModBus RTU, además de las salidas del borne CO2, Temp y Alarmaa.

How do you calibrate it?

Cada instrumento se calibra y verifica por comparación con un instrumento patrón certificado como patrón primario de la WMO y se entrega con certificado de calibración.

Properties

FeatureSpecification
Measurement and operating principle
Transducer typeDual wavelength non-infrared (NDIR) technology
Measurement principleNDIR (Non-Dispersive Infrared Technology) infrared sensor which, thanks to the use of a double filter and a particular measurement technique, compensates for the effect of its aging
Typical measurement range0-2000ppm or 0-5000ppm
CO2 accuracy (fs 0÷2000ppm)±(20ppm+2% of the measurement)
CO2 accuracy (fs 0÷5000ppm)±(20ppm+2% of the measurement)
Long-term stability5% of the field / 5 years
Response time<120s
Stabilization time<15s
CalibrationCada instrumento se calibra y verifica por comparación con un instrumento patrón certificado como patrón primario de la WMO y se entrega con certificado de calibración
Exit signals
Output signal 4÷20mARL<500 Ohm
RS485 output signalRS485 / ModBus RTU
Terminal exitsCO2, Temp, Alarmaa
Power supply, environment, and mechanical data
Feeding12÷30Vdc
Consumption<2W @ 24Vdc
ProtectionsProtection against short circuits and overvoltage; polarity reversal and transients
Operating temperature-25 ÷ +60°C (0÷100% RH, non-condensing)
Electronics protectionIP21
Made inABS and stainless steel screws
DimensionsView map
Weight120g
Regulatory complianceEC
Typical applications
Indoor air quality controlEnvironments with crowds and non-continuous flow of people: art galleries, museums, caves, auditoriums, schools, hospitals, greenhouses, animal breeding
NESA SCO2 Carbon Dioxide Sensor
Dimensions of the NESA SCO2 carbon dioxide sensor

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft Ø4–8 mm | Housing Ø38 mm | 1 to 2500 impedances/revolution | Push-pull; line driver (5 V only) | Power supply 5 V ±5 %, 5–12 V, 12–24 V | IP54 shaft side | Elastic coupling
Monitran-Logo
Response from DC (0 Hz) | Dynamic ranges ±1 to ±50 g | 50 or 100 mV/g | Power supply 12-24 V DC | Stainless steel, IP65 | −20 to +90 °C
Disibeint Electronic, manufacturer of level sensors and control relays
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Keller logo
Digital pressure gauge
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Absolute, wire diameter 0.51 mm | Stroke up to 6 m | Resolution 0.1 or 1 mm | SSI, Gray or binary; preset S1/S4 | 10–30 V DC | IP64 (IP65 connectors) | Linearity ±0.05 % fs.
AIVIM logo
Electrochemical Technology | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK | DIN/ISO Clamp Connection
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange mounting Ø115 mm | Housing Ø96 mm, shaft Ø11 h7 | 1 to 3600 imp/rev | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 with Z option) | Up to 6000 rpm (3000 with Z)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63.5 mm | B10 type flange (Ø115) | Ø11 h7 stainless steel shaft | 1 to 10000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange 92 mm | Ø90 mm, shaft Ø10 h7 | 1–90000 imp/revolution | NPN, PNP, push-pull, driver, 1 Vpp | 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (1 MHz optional)
DPF Sensors logo
Soil moisture sensor
Shopping Basket