Schreiber SM64 Series Redundant Angular LVDT

Redundant Angle LVDT | Independent Dual Channel 2 x 60° | IP68 Hermetic Protection | Stainless Steel Housing 7kg | 80.0 mm PCD Flange | 4-20mA / ±10V Outputs | EMI Immunity

He angular LVDT The redundant Schreiber SM64 series represents the safety-critical standard in rotary measurement for extreme conditions. This device, technically classified as a dual-system inductive transducer, integrates two electrically isolated measuring channels in a massive 7 kg stainless steel housing. This architecture ensures a signal stability and EMI immunity absolute, allowing a 1:1 compatibility / drop-in replacement in naval rudder control systems, port cranes and port machinery where the failure of a sensor would paralyze the logistics operation.

Designed to withstand immersion and harsh saline environments with protection IP68, This angle transducer eliminates mechanical wear by lacking internal physical contact, ensuring an accuracy of 0.5% for millions of cycles. The SM64 is the ideal rotary position sensor for industrial installations requiring direct PLC redundancy, combining the ease of finding an "angular LVDT" with the robustness of heavy-duty, naval-grade armored German equipment. See here for the dimension diagram for mounting on an 80.0 mm flange.

Properties

Geometry and Electrical SpecificationTechnical Details SM64
Redundant Configuration2 Independent Systems (Galvanic Isolation)
Angular Measurement Range2 x 60° (Configurable for symmetrical ranges)
Analog Outputs (.641-4)Dual channel 4-20 mA | 0-20mA (CW/CCW)
Voltage Outputs (.645-8)Dual channel ±10 VDC | 0-10VDC
Bolt Circle (PCD)80.0 mm (4 fixing screws)
Degree of WatertightnessIP68 (Total protection against immersion)
Linearity (Precision)± 0.5% FS (Schreiber metrological guarantee)
Total Equipment Mass~ 7 kg (Massive anti-vibration design)
EMI shieldingTotal immunity against external magnetic fields
Temperature RangeIndustrial range -40 °C to +85 °C
Shock Resistance20 g SRS (Heavy Duty Protocol)
Bandwidth800 Hz (Dynamic response on each channel)
Operating Voltage20-32 VDC (Internal filtering included)
Electrical InterfaceCable outlet with stainless steel cable gland Pg
Housing MaterialSpecial Stainless Steel (High corrosion resistance)
Schreiber SM64E angular LVDT sensor for rotary position measurement.

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current, or ratiometric output | Ø 28 mm | 12-bit resolution | Ø 6 mm shaft or push-in coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67 | Up to 360°
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Disibeint Electronic, manufacturer of level sensors and control relays
Level float for automatic filling and emptying control
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | Output 0.1 … 10 V or 4 … 20 mA | Stroke 100 … 1000 mm | Linearity ≤ ±0.025 % FS (min. ±100 µm) | Resolution 10 / 20 µm | 18 … 32 VDC | IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Square flange □80, shaft Ø8 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP65 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | □45 mm, clutch drive | 1–2500 bpm with clutch | NPN, PNP, push-pull, driver | 5–28 V power supply | IP64 shaft side | 1 m radial CV cable (IP65)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
pH sensor for range 0 to 13pH with BNC connector Compatible with all controllers on the market

Request a quote or technical information

Please tell us the quantity you need to measure, the range, the accuracy, the output signal, or any other requirements of your application.

We will help you select the right equipment and send you a quote or technical documentation.

You can also contact us by phone:

91 764 21 00

Shopping Basket