Incremental Encoder for Motors I/59MA
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Incremental Encoder for Motors, SENSORS
Motors require robust position sensors that support through shafts and internal tangential couplings for direct transmission without mechanical losses. This I/59MA Incremental Motor Encoder addresses the need for precise integration in demanding industrial environments where shaft reliability is critical for speed and position control.
The technical solution incorporates an aluminum base with an anodized coating that ensures mechanical stability and efficient heat dissipation. Weighing 340 g, it supports radial and axial loads of up to 8 kg, maintaining a bearing life exceeding 1.5 billion revolutions under standard operating conditions.
The design allows for IP65 protection at the output, depending on the configuration, and vibration resistance of 12 G in the 10 to 2000 Hz range. Its operation remains stable between 0 and 70 °C, making it ideal for high-demand applications. guemisa.es.
- Passthrough shaft with internal tangential coupling for direct drive.
- Base and cover in anodized aluminum for industrial durability.
- IP65 protection on the outlet and shaft according to the specific configuration.
- Guaranteed bearing life of 1.5 x 10^9 revolutions.
Technical Frequently Asked Questions
How does the I/59MA differ from the I/E6 model?
The I/59MA is specifically designed with an internal tangential coupling and passthrough shaft for motors, whereas the I/E6 is typically a standard mounting model. Furthermore, the 59MA supports radial and axial loads of up to 8 kg, offering superior robustness for direct-drive applications compared to lighter versions in the series.
What alignment precautions does the I/59MA shaft require?
The encoder allows a maximum joint compensation of ±0.2 mm axially and ±0.05 mm radially, according to the datasheet. It is crucial to ensure that the shaft does not exceed these limits to avoid counting errors, especially in configurations with internal tangential coupling where the angular alignment must be maintained within the ±1° specified for the standard version.
What connectors and output options are available for the I/59MA?
The model offers multiple connection options such as terminals, VM or VK connectors, and configurable NPN, PNP, or Push-Pull outputs depending on the selected electronic code. It also supports standard 12V power or wide ranges of 5–30V, allowing for flexible integration with industrial controllers without the need for additional external adapters.
# Images and Names SEO (WebP)
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental (Data sheet says Incremental) |
| Main Application | Motors with passthrough shaft (Data sheet says «DESIGNED FOR USE ON MOTORS») |
| Base | Aluminum (Data sheet says ALUMINUM) |
| Deck | Anodized Aluminum (Data sheet says ANODIZED ALUMINUM) |
| Weight | 340 g (Data sheet says 340 g) |
| Axis | Ø 15÷20 mm Passthrough Stainless Steel (Data sheet says PASS.THR.STAINL.ST) |
| Maximum Radial/Axial Load | 8 kg (Data sheet says 8 kg) |
| Maximum Continuous RPM | 6000 (Data sheet says 6000) |
| Starting Torque | 90 gcm (Data sheet says 90) |
| Bearing Life | 1.5 x 10^9 revolutions (Data sheet says 1.5 x 10^9 revolutions) |
| Impact Resistance | 50G x 11ms (Data sheet says 50G x 11ms) |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) (Data sheet says 12 G (10 ÷ 2000 Hz)) |
| Operating Temperature | 0 ÷ 70 °C (Data sheet says 0 ÷ 70 °C) |
| Pulse for Revolution | 1 ÷ 3600 PPR (Data sheet says 1 ÷ 3600) |
| Maximum Frequency | 100 kHz (Data sheet says 100 kHz) |
Other products
