VF45 Electronic Steering Wheel

Square plane □45 mm | Clutch drive | Anodized aluminum housing, cover and drive | 1 to 2500 pulses per revolution | 5 to 28 V power supply (6 variants) | NPN, PNP, push-pull and driver outputs | Radial connection via CV cable | IP64 shaft-side protection | Starting torque 0.12 Nm | Weight 280 g

Electronic flat □45 mm wheel for panel, with clutch control and resolutions of up to 2500 divisions per revolution.

The VF45 features an anodized aluminum housing, cover, and control knob, and a stainless steel shaft. Its clutch-operated control provides resolutions from 1 to 2500 pulses per revolution. The plane is 45 mm in diameter, and it weighs 280 g.

It features ten electronic output stages (NPN, PNP, push-pull, and 26LS31 and 88C30 drivers) and power supplies of 5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, and 24 V ±5 %. The output is radial (R), with 1 m CV cable and cable end connectors (IP65), and the shaft side protection is IP64. Available in guemisa.es.

  • I control with clutch that provides resolutions of 1 to 2500 pulses per revolution.
  • Plan of □45 mm and weight of 280 g.
  • Casing, cover and remote control of anodized aluminum, with stainless steel shaft.
  • NPN, PNP, push-pull output stages and drivers 26LS31 and 88C30.
  • Life in rotation ≥ 1,000,000 hours a 200 rpm and protection IP64 on the axle side.

Technical Frequently Asked Questions

What resolutions does the VF45 offer?

Its clutched knob gives resolutions from 1 to 2500 pulses per revolution; the manufacturer's example order uses 100.

What electronic outputs and voltages does it support?

It supports NPN, NPN open collector, PNP, PNP open collector, push-pull stages and 26LS31 and 88C30 drivers. Available power supplies are 5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, 24 V ±5 % (max. 15 Vdc with 88C30 driver).

What protection and connections does it offer?

IP64 protection on the shaft side and radial exit (R) by means of 1 m CV cable (IP65) or VM..VD5 cable end connectors (IP65 at the exit).

Properties

FeatureSpecification
Mechanics
HousingAnodized aluminum
CoverAnodized aluminum
AxisStainless steel
Weight280 g
Starting torque0,12 Nm
Electric
Exit-side protectionAccording to connection: IP65 (see page 2)
Max. consumption.80 mA standard · 150 mA line driver
Impulses per lap1 to 2500 (with clutch)
Protection and environment
axle-side protectionIP64
Rotational life at 200 rpm≥ 1,000,000 h
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C
Storage Temp.-30 … +85 °C
Other features
Remote control and graduated discAnodized aluminum
ELCIS VF45 Electronic Steering Wheel
Dimensional drawing of the ELCIS VF45 electronic steering wheel

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Novotechnik TRS-0050 potentiometric linear sensor · reference 400023272 · travel 0…50 mm · M16 connector · spring return
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
63 mm square flange | Resolution up to 1024 steps/revolution (10-bit) | Gray and Excess codes | Parallel, SSI, or analog output (mA/V) | Power supply: 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Ø9.52 h7 stainless steel spindle | Max. radial/axial load: 3 kg | Spindle-side protection: IP54 (IP65 sealed) | Max. continuous speed: 6000 rpm (3000 rpm sealed) | Operating temperature: 0…+60 °C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange | CANopen (C2) or CAN fiber optic (CF) interface | Max. transmission speed 1 Mbaud | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Ø11 h7 shaft in stainless steel (others available upon request) | Max. radial/axial load 180 N | IP65 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C
B&C ELECTRONICS Logo 2026 WATER QUALITY
Combined glass/gel reference pH electrode, epoxy body. 9m cable. Low cost.
B&C ELECTRONICS Logo 2026 WATER QUALITY
Conductivity sensor range -5 to 85ºC, K=1
SIL Pressure. Liquids.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Short-stroke potentiometric transducer with direct analog output for PLC, strokes from 25 to 150 mm and versions with stem or spring-loaded probe
Anemometer with pulse output, proportional to wind speed, industrial use
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø90 mm | Two internal encoders with independent outputs | Ø11 h7 stainless steel shaft | 1 at 36000 + 1 at 2540 pulses/revolution | Max. frequency 100 kHz | Power supply 5–30 V | Outputs NPN, PNP, push-pull, drivers, TTL and sinusoidal | IP65 shaft side (IP66 sealed) | 6000 rpm continuous | Weight 950 g
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT with Electronics | Square Body 30×30 mm | Stroke 100 mm and 200 mm | Output 4-20mA / ±10V | IP67 Protection | Frequency 800 Hz | PCD Mounting 40.0 mm
Shopping Basket