Robust Incremental Encoder I/102

Budget-friendly price Request a quote
Metal housing Ø102 mm | Shaft Ø12 h7 stainless steel | 1 to 25000 imp/rev | NPN, PNP, push-pull, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed) | 100 kHz (300 kHz optional)

The ELCIS 102 (I/102) is a robust incremental encoder with a 102 mm diameter shaft, a 12 mm diameter h7 shaft, and a pulse rate of 1 to 25,000 pulses per revolution. It features a metal housing and a stainless steel shaft suitable for radial and axial loads up to 12 kg, with an anodized aluminum base and cover. It offers two mounting options.

The I/102 delivers from 1 to 25000 pulses per revolution, with a maximum frequency of 100 kHz (300 kHz optional) and NPN, PNP, push-pull electronics, 26LS31 and 88C30 drivers, TTL, discriminator and 1 Vpp sinusoidal output.

Anodized aluminum base and cover and Ø12 h7 shaft that supports 12 kg of radial/axial load. It works from 0 to +70 °C with IP65 protection on the shaft side (IP66 sealed, IP53 under torque) and is connected by cable, connector, cable end connector or terminal box.

  • Resolution of 1 to 25000 pulses per lap and frequency up to 100 kHz (300 kHz optional).
  • Nutrition 5 to 30 V according to the version.
  • Output electronics: NPN, PNP, push-pull, 26LS31 and 88C30 drivers, TTL, discriminator and sinusoidal 1 Vpp.
  • Stainless steel shaft Ø12 h7 with maximum radial/axial load of 12 kg and 6000 rpm continuous.

Technical Frequently Asked Questions

What signal versions does the I/102 offer?

Unidirectional (M), bidirectional (B), bidirectional + zero (BZ) and unidirectional + zero (MZ).

What supply voltages does it support?

5 V ±5 %, 8–24 V, 18–28 V, 8–15 V, 12 V ±5 %, 24 V ±5 %, 12–30/12 V, 8–24/5 V, 10–30 V, 18–28/5 V and 15–30/15 V. With 88C30 driver, maximum 15 Vdc.

What axle protection options are available?

IP65 in standard version, IP66 with sealed bearing (option Z, 3000 rpm continuous) and IP53 with low torque bearings (option B, 8000 rpm continuous).

Properties

FeatureSpecification
Mechanics
HousingMetal Ø102 mm
Weight1000 g
AxisØ12 h7 stainless steel (customizable upon request)
max radial/axial load.12 kg
Electric
Exit-side protectionAccording to connection: IP00 to IP67
Feeding5–30 V according to version (see technical specifications)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap1 to 25000
Max frequency.100 kHz (300 kHz optional)
Protection and environment
axle-side protectionIP65 standard • IP66 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 3000 sealed · 8000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/LZMG102-9000-5-BN-CW-RILZMG10290005BNCWRLow temperature · Sealed bearing · Impregnated electronics · Tropicalization · 9000 pulses/revolution · 5 V ±5 % · Bidirectional · Driver 26LS31 · 1 m cable · IP65 · Radial output
Robust incremental encoder ELCIS I/102
Dimensional drawing of the robust incremental encoder ELCIS I/102

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm | Shaft Ø6 h7, centered Ø20 h7 | 1–2540 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP66 shaft (IP53 under torque) | 60 kHz (100 kHz optional)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity sensor range -5 to 85ºC, K=1
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Graphite sensor with built-in NTC10K, 3m cable, K=1 cm⁻¹Range from 2MicroSiemens to 2,000 milliSiemens,
DPF Sensors logo
Wirelessly configurable RTD to 4/20mA converter in IP65 waterproof case, without probe, built-in Data Logger + display.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Square flange □45 mm | 100 imp/revolution with latching | 1–2500 imp/revolution (option F) | NPN, PNP, push-pull, driver | 5 V or 8–28 V depending on version | IP64 shaft side (IP65 cable)
NESA Environmental Meters
4÷20mA / ModBus RS485 | SO2 | 0÷50 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductive, contactless | SSI 24 and 25 bit | Stroke 100 … 1000 mm | Resolution 1, 5 or 10 µm | Linearity ≤ ±100 µm | 18 … 32 VDC | IP67
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Inductive toroidal conductivity probe with 4-20 mA output and RS485 Modbus RTU. Configurable ranges from 4 to 2,000 mS/cm and TDS up to 1,000 ppt.
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø63.5 mm | B10 type flange (Ø115) | Ø11 h7 stainless steel shaft | 1 to 10000 imp/rev | NPN, PNP, push-pull, driver, 1 Vpp | Power supply 5–30 V | IP65 shaft (IP66 sealed)
NESA Environmental Meters
0÷70 m/s · 0÷360° | Triaxial UVW | ModBus RS485 or analog outputs | 12 ÷ 30 Vdc | 537 x 214mm | 1650g
Shopping Basket