I/44S Compact Incremental Encoder

I/44S – Compact Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 44×56 mm, Pulse range: 1 to 2,540

The incremental encoder ELCIS I/44S It is a rotary sensor with a cylindrical metal housing, designed to provide high performance in industrial applications where precision, reliability and compact format are required. With a body of Ø 44 mm and solid axle of Ø 6 mmThis model offers ease of installation and high mechanical resistance, adapting to demanding working conditions.

The I/44S model provides configurable resolutions of 1 to 2,540 pulses per revolution (ppr) and accepts feeds from 5 to 28 V DC. It is available with various electrical outputs: push-pull, line driver, NPN or PNP, depending on the needs of the control system. Its maximum output frequency reaches 100 kHz, allowing efficient use even in high-speed applications.

With its long-life LED technology, precision bearings, and resistance to shock (up to 50 G) and vibration (12 G), the I/44S is ideal for industrial automation, robotics, specialty machinery, and servo motors.

Properties

ParameterSpecification
ModelELCIS I/44S
GuyIncremental encoder, solid shaft, cylindrical housing
Casing diameterØ 44 mm
Body length56 mm
Shaft diameterØ 6 mm × 10 mm
Resolution1 to 2,540 ppr
Feeding5 to 28 V DC
Maximum output frequencyUp to 100 kHz (depending on electronic version)
Signal typePush-pull / Line driver / NPN / PNP / Open collector
Body materialAnodized aluminum
Shaft materialStainless steel
BearingsHigh precision, service life: 1.5 × 10⁹ revolutions
Maximum speedUp to 6,000 rpm
Starting torqueFrom 8 to 30 g cm (depending on bearing type)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2,000 Hz)
Operating temperature0 °C to +70 °C
Storage temperature–30 °C to +85 °C
ProtectionIP64, IP66 or IP53 (depending on bearing configuration)
Weight≈ 120–130 g
Light sourceLED, lifespan ≥100,000 hours
I/44S Miniature Incremental Encoder ELCIS BRAND

Other products

Keller logo
Compact digital pressure gauge, 31 and 300 bar, with MIN/MAX display
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental sensor | Direct motor mounting | Hollow shaft Ø6 to 12.7mm | 5V to 30V power supply | Push-Pull or NPN output | IP65 side protection | Max speed 6000 RPM | Starting torque >15 gcm | Weight 95 grams | Bearing life 1.5 billion revolutions
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Power supply 5V | Shaft Ø14mm | Weight 3.5kg | Stainless steel base | Sinusoidal output | IP65 protection | Bearing life 10^9 revolutions | Starting torque 5000 gcm | Max frequency 2.2MHz | Temperature -30 to 85°C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow Stainless Steel Shaft | Aluminum Base | Valox 420 Cap | Weight 290g | Maximum Load 6kg | Continuous RPM 3000 | Starting Torque 60gcm | Bearing Life 1.5×10^9 Rev | Impact Resistance 50G | Shaft Side IP Rating 65
Digital/Analog Meter | Variable Range | 0-10V/4-20mA Input | USB + Datasheet
LVDT displacement sensor, ranges from 10 to 40 mm, with or without probe, with separate electronics.
Transit time ultrasonic flow meter
Monitran-Logo
Top Input | Sensitivity 100mV/g | Lightweight Design (45g) | Frequency 2Hz-10kHz | Dynamic Range ±80g | IEPE Power Supply | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | 3-pin Connector 62GB
SPECIAL SOLAR SECTOR
Shopping Basket