Single-turn Absolute Encoder A/368

Budget-friendly price Request a quote
Housing Ø68, spindle Ø6 h7 | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 spindle (IP66 sealed) | Gray, Binary, Excess or BCD

The ELCIS 368 (A/368) is a general-purpose 2-to-11-bit optical single-turn absolute encoder.

As an optical single-turn absolute encoder with LED source and phototransistors, the A/368 offers up to 2048 steps per revolution (11 bits) in Gray, Binary, Excess, BCD, or custom code. Output is parallel, with options for zero, latch, and parity LEDs; SSI serial (RS422) in Gray or Excess; or analog current or voltage (0–10 V) with 10-bit resolution.

With anodized aluminum base and cover and a Ø6 h7 stainless steel shaft, it supports 2 kg of radial/axial load, resists impacts of 50 G (11 ms) and vibrations of 12 G (10–2000 Hz), and operates between 0 and +70 °C. Weight: 320 g.

  • Resolution of 2 to 11 bits: until 2048 steps per lap.
  • Analog output of 10 bits, in current or in 0–10 V in 360°.
  • Option of Parity for automatic checking of output stages.
  • LED light source with life ≥ 100,000 h.

Technical Frequently Asked Questions

What resolutions does the A/368 offer for each code?

In Gray, Binary and BCD, 8, 16, 32, 64, 128, 256 or 512 steps per revolution; in Gray and Binary, also 1024 or 2048; in Excess, Binary and BCD, 10, 100, 500, 1000, 180, 360, 720 or 900; and in Excess and Binary, 1440, 1800 or 2000. Other resolutions available upon request.

What limitations does analog output have?

Converts the 10-bit position (1024 div/revolution) into an analog current or voltage (0–10 V) for 360° of rotation. Available only with 15 V or 18–28 V power supply and 1024 resolution.

Can the SSI interface be used with binary or BCD code?

No. The SSI serial output is only available with Gray or Excess code. For Binary or BCD, the parallel interface is used, where the Latch input is standard.

Properties

FeatureSpecification
Mechanics
HousingØ68 mm
Base and lidAnodized aluminum (customizable upon request)
AxisØ6 h7 stainless steel (optional Ø5, Ø8, Ø9.52, Ø10, Ø12 or on request) (customizable on request)
max radial/axial load.2 kg
Starting torque18 gcm standard · 30 gcm sealed · 8 gcm low torque
Electric
InterfaceParallel (standard) · SSI (RS422) · analog current or voltage
Exit-side protectionIP64 to IP66 according to connection
Feeding5 V ±5 % · 15 V ±5 % · 8–24 V · 18–28 V · 10–30 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Max frequency.50 kHz (customizable upon request)
Exit codesGray, Binary, Excess, BCD, Custom
Max resolution.2048 steps/turn (11 bit)
Protection and environment
axle-side protectionIP64 standard • IP66 sealed • IP53 low torque
max. continuous RPM6000 standard · 3000 sealed · 8000 low torque (intermittent: +30 %)
Operating/storage temperature0 … +70 °C / -30 … +85 °C (customizable upon request)
ReferenceConfiguration
A/368-G-1024-824-KP-CM5-R+VM5FA368G1024824KPCM5R+VM5FGray · 1024 steps/revolution · 8–24 V · NPN open emitter + PTC · 26 pins PT02A16-26P · IP65 · radial output
A/Z368-G-1024-1828-B-CM5-RAZ368G10241828BCM5RSealed bearings · Gray · 1024 steps/revolution · 18–28 V · Push-pull + PTC (1–12 bit) · 26 pins PT02A16-26P · IP65 · Radial output
A/Z368-G-1024-1828-B-CM5-R+VM5FAZ368G10241828BCM5R+VM5FSealed bearings · Gray · 1024 steps/revolution · 18–28 V · Push-pull + PTC (1–12 bit) · 26 pins PT02A16-26P · IP65 · Radial output
ELCIS A/368 single-turn absolute encoder
Dimensional drawing of the ELCIS A/368 single-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 55mm | Shaft Ø 6 mm | Ub max. 42VDC | IP65 | 355° or 90°, continuous rotation
ATESTEO LOGO, manufacturer of torque sensors
500 · 1000 N·m | Clase 0,02 % | 20 000 rpm (23 000 opc.) | Rotor Ø128 mm | Taladros 101,5 mm | RS422, tensión, bus CAN
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Square flange □63.5 mm | Shaft Ø10 h8 | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Thread Ø 0.51 mm | Stroke 1000, 1500 or 2000 mm | Pot. 1 kΩ, 4–20 mA, 0–10 V, 0–5 V | Incremental option (I) | Supply 5, 12 or 24 V ±5 % | Linearity ±0.25 % fs | IP54
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
63 mm square flange, Ø9.52 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP65 shaft (IP66 sealed) | Optional shaft Ø6, 8, 10, 11 or 12
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity range from 0 to 20 mS/cm. Output 4/20mA
ATESTEO LOGO, manufacturer of torque sensors
200 · 500 · 1000 · 1500 · 2000 · 2500 · 3000 N·m | Clase 0,05 % | 20 000 rpm (25 000 opc.) | Rotor Ø150 mm | Taladros 130,0 mm | Frecuencia, tensión, corriente, bus CAN
Pesacam logo: Weighing systems for trucks
Onboard scale | Bluetooth to Android and iOS app | Wireless to cabin | 3 sensors | Manufactured in Bellvei (Tarragona)
DPF Sensors logo
RS485 humidity and temperature sensor
Shopping Basket