EFK200 Linear Cable Transducer

Budget-friendly price Request a quote
Thread Ø 0.9 mm, 8 m/s | Stroke up to 2000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)

El ELCIS EFK200 es un transductor lineal por cable de hilo Ø 0,9 mm, en versión incremental o analógica, para medir desplazamientos lineales con carrera útil de hasta 2000 mm y resolución de 0,1 o 1 mm.

Stainless steel cable of Ø 0.9 mm with pull-out and pull-out forces of 7.3 N and 3.5 N. It offers incremental electronics (NPN, PNP, push-pull, 26LS31 or 88C30 driver, TTL 7404, 1 Vpp sinusoidal) or analog electronics (1 kΩ potentiometer, 4÷20 mA, 0÷10 V), max. frequency of 100 kHz, linearity of ±0.05 % fs, max. reading speed of 8 m/s and max. acceleration of 5 G.

IP64 encoder and IP53 mechanical encoder, operates from 0 to 70 °C (storage from -30 to 85 °C) and weighs 1000 g. It is powered from 5 to 30 V according to the code and is connected by 1 m cable, connectors, cable end connectors or Phoenix terminal box, with protection between IP00 and IP67 depending on the connection.

  • Maximum useful stroke of 2000 mm.
  • Stainless steel cable Ø 0.9 mm; bearing life 1.5 × 10⁹ revolutions.
  • Exit incremental (NPN, PNP, push-pull, driver, TTL, sine 1 Vpp) either analog (1 kΩ, 4÷20 mA, 0-10 V).
  • Resolution of 0.1 mm either 1 mm with linearity of ±0.05 % fs.
  • Maximum reading speed 8 m/s and max. acceleration of 5G.

Technical Frequently Asked Questions

¿Qué carreras de medida y resoluciones admite el EFK200?

Admite una carrera útil máx. de 2000 mm, con resoluciones de 0,1 mm (código 100) y 1 mm (código 1000).

¿Qué electrónicas y alimentaciones ofrece el EFK200?

NPN, PNP, push-pull electronics, 26LS31 or 88C30 driver, TTL 7404, 1 Vpp sinusoidal and analog (1 kΩ potentiometer, 4÷20 mA, 0÷10 V), with 5 to 30 V power supply depending on the code. With 88C30 driver, max. 15 Vdc.

¿Qué conexiones y grados de protección tiene el EFK200?

IP64 encoder and IP53 mechanical components; output depends on the connection. Connection via 1 m CV cable (IP65), CM, SM, CL, SL, CD, CH, CH5, CI, CE, C4, and CH6 connectors (IP63 to IP67), cable end connectors (IP65 at the encoder output), or MS terminal box (IP00). Cable, connectors, and cable end connectors support axial or radial (R) output; the MS terminal box supports axial output only.

Properties

FeatureSpecification
Mechanics
Max. standard length.2000 mm (customizable upon request)
Bearing life1.5 × 10⁹ revolutions
Weight1000 g
Electric
Resolution0,1 mm, 1 mm (customizable upon request)
Acceleration / Speed / Max Frequency.5 G · 8 m/s · 100 kHz
Maximum linearity error.±0.05 % fs (customizable upon request)
ElectronicsNPN, PNP, push-pull, driver 26LS31/88C30, TTL 7404, sinusoidal 1 Vpp, potentiometer 1 kΩ, 4÷20 mA, 0÷10 V
Feeding5 V, 12 V, 24 V (±5 %) or ranges of 8 to 30 V, according to code
Max. consumption.Standard 120 mA · Line driver 180 mA (customizable upon request)
ExitAxial or radial (R); MS axial-only terminal box
Light sourceLED with a useful life >= 100000 h
Protection and environment
Degree of protectionEncoder: IP64 • Mechanical: IP53 • Outlet: according to connection (IP rating according to CEI EN 60529, EN 60529, IEC 529 standards)
Impact/vibration resistance50 G x 11 ms · 12 G (10 ÷ 2000 Hz)
TemperatureOperating temperature 0 ÷ 70 °C • Storage -30 ÷ 85 °C (customizable upon request)
Other features
Cable and traction forcesØ 0.9 mm, Stainless steel · Extension 7.3 N · Retraction 3.5 N
ReferenceConfiguration
L/EFK200-1030-BB-1000-1-CVLEFK2001030BB10001CV10-30 V · bidirectional · Push-pull PRO · 1 mm · ×1 · 1 m cable · IP65 · axial output
L/XEFK200-5-BZ-N-100-4-CL-RLXEFK2005BZN1004CLRCustom option · 5 V ±5 % · Bidirectional + zero · Driver 26LS31 · 0.1 mm · ×4 · Standard 10-pin connector · IP65 · Radial output
ELCIS EFK200 Linear Cable Transducer
Plano dimensional del transductor lineal por cable ELCIS EFK200

Related documentation, cases, and guides

Other products

DPF Sensors logo
Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses
ATESTEO LOGO, manufacturer of torque sensors
Reference Torque Gauge | 20,000 – 30,000 N·m | 0 RPM | PCD Flange 218.0 mm | Inertia 0.1558 kg·m²
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | B10 flange, Ø11 h7 shaft | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)
DPF Sensors logo
NDIR CO2 controller sensor (4000 ppm) RS485 output with LED signaling
DPF Sensors logo
Monoaxial or biaxial, Range ±10° to ±90º, Monoaxial to ±180º Outputs 4…20- 0-5VDC, RS-232, Modbus, Canbus, Accuracy ±0.1º and repeatability of ±0.05
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Self-cleaning turbidimeter, Measuring range 0-4,000/40,00/400,0/4,000 NTU
DPF Sensors logo
Analog CO2 sensor with configurable scaling function
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
30 mm square flange | Housing Ø27 mm, shaft Ø6.35 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | Ø 79 mm | Resolution 14 bits | Shaft Ø 13 mm or Ø 10 mm | 12/24 VDC (8 … 34 VDC) | IP67/IP69K | 360°, 1 or 2 channels
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel pH reference electrode, with 1.5m cable and BNC connector, double ceramic junction for high temperature
Shopping Basket