I/27Q Miniature Incremental Encoder

Budget-friendly price Request a quote
30 mm square flange | Housing Ø27 mm, shaft Ø6.35 h7 | 50–800 impedances/revolution | NPN, PNP, push-pull, driver, TTL | 5 V ±5 % | IP64 shaft (IP65 sealed) | Max. frequency 60 kHz

The ELCIS 27Q (I/27Q) is a miniature incremental encoder with a 30 mm square mounting flange and a Ø27 mm cylindrical housing in anodized aluminum.

Built in a 27 mm diameter anodized aluminum cylindrical housing with a 25.4 mm diameter front centering point and a 6.35 mm diameter solid stainless steel shaft. It delivers 50 to 800 pulses per revolution with a maximum frequency response of 60 kHz. Compatible with NPN, PNP, push-pull, 26LS31, 88C30, and 7404 TTL electronics at 5 V ±5 %.

It allows mounting with axial or radial output via cable or cable end connectors, reaching up to 6000 continuous rpm (12000 rpm with low torque bearings) and protection up to IP65 on the shaft side.

  • Square flange: Ø27 mm housing with 30 mm square flange.
  • Solid stainless steel shaft: Ø6.35 h7 with front centering Ø25.4 h7.
  • Available electronics: NPN, PNP, push-pull, 26LS31 and 88C30 drivers, and TTL 7404.
  • Mechanical options: standard, IP65 sealed and low torque versions.

Technical Frequently Asked Questions

How does the I/27Q encoder differ from the 27 model?

The I/27Q incorporates a 30mm square front flange instead of the servo flange of the 27 model.

What are the dimensions of your mounting flange?

It has a 30 mm side square flange with front centering of Ø25.4 h7 and fixing holes.

What are the electronic output options?

Supports NPN, PNP, push-pull, 26LS31, 88C30 and TTL 7404 driver outputs.

Properties

FeatureSpecification
Mechanics
HousingMetal Ø27 mm
Weight90 g
AxisØ6.35 h7 stainless steel (customizable upon request)
max radial/axial load.0,4 kg
Electric
Exit-side protectionDepending on the connection: IP00 to IP65 (see technical data sheet)
Feeding5 V ±5 % (see technical sheet)
Max. consumption.120 mA Standard · 180 mA line driver (customizable upon request)
Impulses per lap50 to 800
Max frequency.60 kHz
Protection and environment
axle-side protectionIP64 standard • IP65 sealed (Z) • IP53 low torque (B)
max. continuous RPM6000 standard · 4500 sealed · 12000 low torque (intermittent: +30 %)
Impact resistance50 G × 11 ms
Vibration resistance12 G (10–2000 Hz)
Operating temperature0 … +70 °C (customizable upon request)
Storage Temp.-30 … +85 °C
ReferenceConfiguration
I/27Q-500-5-BZ-N-VL-01I27Q5005BZNVL01500 pulses/revolution · 5 V ±5 % · bidirectional + zero · Driver 26LS31 · Cable with standard 10-pin connector · axial output
ELCIS I/27Q miniature incremental encoder
Dimensional drawing of the ELCIS I/27Q miniature incremental encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø90, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP65 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
-40 … +105 °C (Z-TH1) | Pressure ≤ 40 bar (Z-TH1-P32) | Stem Ø 10 mm and profile
DPF Sensors logo
ATEX pressure transducer
NESA Environmental Meters
Pt100 4-wire | -40 ÷ +60°C | Pt100 1/3DIN | ±0.1°C @ 0°C | WMO · EN 15518-3:2011 | 10÷30Vdc | 700g
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Incremental A/B/Z | Ø 48 mm | 1024 ppr (4096 counts) | Spindleless: magnetic position marker | 5 VDC or 24 VDC | IP67 / IP68 / IP69 | Up to 29000 rpm
Monitran-Logo
4-20 mA output proportional to RMS speed | Two-wire for PLC, DCS and controllers | 12-32 V DC | 2 Hz to 1 kHz ±10% | Stainless steel | IP67 / IP68 (1185W)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Graphite sensor with built-in NTC10K, 3m cable, K=1 cm⁻¹Range from 2MicroSiemens to 2,000 milliSiemens,
DPF Sensors logo
Industrial linear resistive sensor • 10 to 200 mm • multiple versions • infinite resolution
Shopping Basket