A/9115P Absolute Fieldbus Encoder

Budget-friendly price Request a quote
PROFIBUS-DP Class 2, 12 Mbaud | B10 flange, Ø11 h7 shaft | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP65 shaft (IP66 sealed)

The ELCIS 9115P (A/9115P) is a PROFIBUS-DP absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation) with B10 flange and Ø11 shaft.

The A/9115P is a single-turn or multi-turn absolute encoder with a PROFIBUS-DP Class 2 interface and RS485 line driver, with a transmission speed of up to 12 Mbaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. The address is programmed using selectors on the terminal box, and two LEDs indicate the status.

Built with an aluminum housing and a Ø11 h7 stainless steel shaft (others available upon request), it supports a radial/axial load of 180 N. It has IP65 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.

  • Flange B10 and stainless steel shaft Ø11 h7.
  • Interface PROFIBUS-DP Class 2 with RS485 line driver up to 12 Mbaud.
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • Programmable steering with selectors and 2 LED of state.

Technical Frequently Asked Questions

What resolutions and lap times does the A/9115P allow you to configure?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What parameters are programmable on the PROFIBUS-DP interface?

Direction of rotation (complement), resolution per revolution, total resolution, preset value, speed output and software limit switches.

What connections are available?

Connection cover with 3 IP65 cable glands (3PG) and connection cover with 2 IP65 cable glands, Ø 9÷13 mm (2M20).

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight1800 g single turn · 1900 g multiturn
AxisØ11 h7 stainless steel (others available upon request)
max radial/axial load.180 N
Electric
Exit-side protectionIP65 according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
LSB pitch frequency800 kHz
Exit codeBinary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit/turn · 30 bits in 16384 turns
InterfacePROFIBUS-DP Class 2 (DP) · RS485 · max. 12 Mbaud
Protection and environment
axle-side protectionIP65 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
ReferenceConfiguration
A/9115P-12-12-11-B-DP-0-3PGA9115P121211BDP03PG4096 steps/rev. · revolutions: 4096 · standard Ø11 mm shaft · Binary · PROFIBUS-DP Class 2 · Connection cover with 3 cable glands · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/9115P absolute fieldbus encoder
Dimensional drawing of the ELCIS A/9115P absolute fieldbus encoder

Related documentation, cases, and guides

Other products

NESA Environmental Meters
Dry reed contact | Class A | 1000 cm² | 0.2 mm/imp. | Low energy heater | 10÷30Vdc
DPF Sensors logo
SPECIAL SOLAR SECTOR
NESA Environmental Meters
Piezometric capsule, NTC | 0–20 bar | -5–+80 °C | <0.5% fs or better | 2 x 4–20 mA | Current loop or 10–28 Vdc | 316 stainless steel
DPF Sensors logo
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Servo flange type | 100 impedances/revolution with latching | 1–2500 impedances/revolution (option F) | NPN, PNP, push-pull, driver | Power supply 5–30 V depending on version | IP65 shaft side (output IP00–IP67)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 300 mm | Linearity ±0.05 … ±0.25 % | Repeatability 0.01 mm | 42 V max. | IP54 | Cable or M8 connector
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current or ratiometric output | Ø 36mm | Resolution 16 bits | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 5 VDC or 24 VDC | IP67 / IP6K9K | 2 to 16 turns (up to 5760°)
NESA Environmental Meters
Soil moisture in VWC | 0–100% VWC | High frequency, non-resistive | 4–20 mA · 0–2 Vdc · RS485/Modbus | -40–85°C | 10–20 Vdc | Ø = 7 mm, L = 150 mm
Shopping Basket