HPS-LX
Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses
- Manufacturer: DPF Sensors
- Category: Displacement, Linear by thread, SENSORS
Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses
Properties
Other products
Insulated through-shaft H7: Ø12, Ø15, Ø20 or Ø25 mm | Internally insulated elastic coupling | Resolution up to 8192 steps/revolution (13-bit) | Gray, Binary, Excess, and BCD codes | Parallel or SSI (RS422) output | Power supply 5 V, 15 V, 8–24 V, 18–28 V, or 10–30 V | Max. radial/axial load 5 kg | Shaft-side protection IP65 (IP66 sealed) | Max. continuous speed 6000 rpm (3000 rpm sealed) | Operating temperature 0…+70 °C
General Purpose | Stainless Steel | TNC Connector | Sensitivity 100mV/g | Frequency 2Hz-10kHz | Non-Insulated Base | IP65 Protection | Range ±80g | Weight 110g | Temp. -25 to 120°C
Universal converter for potentiometric position sensors (100 Ohm/500Kohm). Multiple outputs: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated.
Submersible pressure level sensor, up to 150 meters of water column
Aluminum housing Ø58 mm with servo-type mounting | DeviceNet interface (D2) | Programmable baud rate | Max. resolution 16 bits/revolution · 30 bits in 16384 revolutions | Binary output code | Power supply 10–30 V DC, max. consumption 2.5 W | Ø10 h8 shaft in stainless steel (optional Ø6) | Max. axial/radial load 40/110 N | IP64 protection on shaft (IP66 sealed) | Operating temperature -40 … +85 °C
Built-in elastic coupling | Aluminum housing Ø59 mm | Maximum resolution of 16 bits per revolution | Synchronous serial interface SSI (RS422) | Gray and Binary output codes | Preset (S1) or preset pushbutton (S4) options | 10–30 V DC power supply | Hollow shaft F7: Ø15 mm standard (Ø8, Ø10, Ø12 or others on request) | IP64 protection on shaft (IP66 sealed) | Working temperature -40…+85 °C (with cable: -5…+70 °C)
Aluminum housing Ø58 mm with servo-type mounting | Maximum resolution of 16 bits per revolution | Synchronous serial interface SSI (RS422) | Gray and Binary output codes | Preset (S1) or preset push-button (S4) options | 10–30 V DC power supply | Ø10 h8 stainless steel shaft (Ø6 optional) | Max. radial/axial load 40/110 N | IP64 protection on shaft (IP66 sealed) | Operating temperature -40…+85 °C (with cable: -5…+70 °C)
Metal housing Ø58 mm | Servo flange | Ø6 h7 stainless steel shaft | 1 to 25,000 pulses/revolution | Max. frequency 100 kHz | Power supply 5–30 V | Outputs NPN, PNP, push-pull, drivers, TTL and sinusoidal | IP64 shaft side (IP66 sealed) | 8,000 rpm continuous | Weight 300 g