A/959CP Absolute Fieldbus Encoder

Budget-friendly price Request a quote
PROFIBUS-DP Class 2, 12 Mbaud | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)

The ELCIS 959CP (A/959CP) is a PROFIBUS-DP absolute encoder, single and multi-turn (single-rotation and multi-rotation) with a Ø59 mm diameter and a hollow Ø15 shaft. It is servo-type fixed using front clips or screws.

It features an RS485 line driver and a transmission speed of up to 12 MBaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. The address is programmed using selectors on the terminal box, and two LEDs indicate the status. Options include: all stainless steel (Q), sealed bearings (W), and a custom option (X).

Constructed with a Ø59 mm aluminum housing and a hollow F7 stainless steel shaft (standard Ø15 mm; Ø8, Ø10, Ø12, or others available upon request), it supports radial and axial loads of 40 and 110 N. It features IP64 protection on the shaft side (IP66 in the sealed version; output side depends on the connection), withstands 30 G shocks and 10 G vibrations, and operates from -40 to +85 °C. It includes reverse polarity and overvoltage protection; 400 x 10⁶ write cycles; EMC certification according to EN 61000-6-2 and EN 61000-6-4; and a 2-year warranty.

  • Interface PROFIBUS-DP Class 2 with RS485 line driver up to 12 MBaud.
  • Hollow shaft F7 of Ø15 mm with built-in elastic coupling.
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • Nutrition 10–30 V DC with maximum consumption of 2.5 W and 2 LED of state.

Technical Frequently Asked Questions

What options can be ordered with the A/959CP?

All stainless steel (Q), sealed bearings (W) and custom option (X); (0) is the standard version.

What connections are available?

3 IP65 cable glands (3PG), 3 IP65 steel cable glands (3PG-VA) and 2 IP65 cable glands Ø 9–13 mm (2M20).

What parameters are programmable on the PROFIBUS-DP interface?

Direction of rotation (complement), resolution per revolution, total resolution, preset value, speed output and software limit switches.

Properties

FeatureSpecification
Mechanics
HousingAluminum Ø59 mm (customizable upon request)
Weight550 g single turn · 600 g multiturn
Shaft (stainless steel)F7 Hole: Standard Ø15 mm; Ø8, Ø10, Ø12 or others upon request
Elastic couplingMax. compensation: axial ±0.1 mm · radial ±0.2 mm · angular ±1°
max radial/axial load.40 / 110 N
bearing life>10⁵ h at 1000 rpm
Electric
Shaft/outlet protectionIP64 shaft (IP66 sealed) · output according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
LSB pitch frequency800 kHz
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.65536 steps/turn (16 bit) · 16384 turns (30 bit) · Binary
InterfacePROFIBUS-DP Class 2 (DP) · RS485 · max. 12 MBaud
Protection and environment
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
ReferenceConfiguration
A/959CP-12-12-15-B-DP-0-3PGA959CP121215BDP03PG4096 steps/revolution · revolutions: 4096 · shaft Ø15 mm · Binary · PROFIBUS-DP Class 2 · 3 cable glands · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/959CP absolute fieldbus encoder
Dimensional drawing of the ELCIS A/959CP absolute fieldbus encoder

Related documentation, cases, and guides

Other products

Keller logo
Digital pressure gauge
Dimetix_AG-1
High-Durability Industrial Connectivity for Electrical and Data Transmission Range: 5 Meters in length with certified IP65 protection
Dimetix_AG-1
Long-range industrial laser sensor (100 m without reflector / 500 m with reflector / ±3 mm / 250 Hz)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Incremental A/B/Z, RS-422 (TTL) or HTL | Ø 28 mm | 1024 ppr (4096 counts) | Shaft Ø 6 mm or push-in coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Ø66 mm drive | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5–30 V power supply | IP64 shaft side (IP65 cable) | 1 m CV radial cable
ATESTEO LOGO, manufacturer of torque sensors
Type K Thermocouple | -200…1200 °C | 1000 Vrms Insulation | 50 Hz CAN Sampling | IP20/IP66
Monitran-Logo
100 mV/g ±10% (IEPE) | 0.8Hz to 10kHz ±5% | ±50g | 30g | -25 to 140°C | 25 mm high, Ø15 mm | Quick Nut Base 1/2″-20 UNF | Stainless steel, IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage, current, or ratiometric output | Ø 28 mm | 16-bit resolution | Ø 6 mm shaft or press-fit coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67 | 2 to 16 turns (up to 5760°)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | 41.5 x 59 mm max. | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69K | 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
B10 flange, Ø11 h7 shaft | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 shaft (IP66 sealed) | Optional shaft Ø8, 9.52, 10, 12 or 12.5
Shopping Basket