LEO1

Square flange 38×38, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)

B10 flange, Ø11 h7 shaft | Up to 65536 steps × 16384 revolutions | SSI or SSI with preset, Gray/binary | 10–30 V power supply | IP64 shaft (IP66 sealed) | 800 kHz step frequency | ±½ LSB accuracy (<13 bit)

Salida incremental | Sin saliente posterior | 100 imp/vuelta con enclavamiento | NPN, PNP, push-pull, driver | Alimentación 5–28 V según versión | IP64 lado eje (bornas IP00) | Bornas Phoenix MS, salida axial

Eje hueco Ø4, 6 u 8 mm H7 | Carcasa Ø38 mm | 1 a 2540 imp/vuelta | NPN, PNP, push-pull, line driver | Alimentación 5–30 V | IP65 eje (IP66 sellado Z) | Acoplamiento tangencial

Early lightning warning | −100 … +100 kV/m | 3 s response time | 3 alarm levels | Modbus RS-485 | 6061 aluminum, Ø78 × 105 mm

Digital/Analog Meter | Variable Range | 0-10V/4-20mA Input | USB + Datasheet

Industrial linear resistive sensor • 10 to 200 mm • multiple versions • infinite resolution

Through-shaft Ø15–30 H7 | Ø90 mm, tangential coupling | 1–36000 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP65 shaft | 100 kHz (300 kHz optional)

Self-cleaning turbidimeter, Measuring range 0-4,000/40,00/400,0/4,000 NTU

Double housing, B10 flange Ø115 | Shaft Ø11 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP66 shaft (IP67 sealed) | Gray, Binary, Excess or BCD