A/958SC Absolute Fieldbus Encoder

Budget-friendly price Request a quote
CANopen (C2) or fiber optic (CF) | Housing Ø58 mm, servo-type mounting | Shaft Ø6 f6 (Ø10 optional) | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)

The ELCIS 958SC (A/958SC) is a CANopen absolute encoder, single-turn and multi-turn (single-rotation and multi-rotation), with a Ø58 mm diameter, servo flange, and Ø6 shaft. It is servo-type mounted using front clips or screws.

The A/958SC is a single-turn or multi-turn absolute encoder with a CANopen/CAN (C2) or fiber optic CAN (CF) interface and an ISO 11898 CAN transceiver, with a transmission speed of up to 1 MBaud. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution and 1, 4096, or 16384 revolutions, with a maximum of 30 bits in binary code. It includes two status LEDs and SMD technology, with optical LED readout and an IR photodiode array ASIC.

Built with a Ø58 mm aluminum housing and a Ø6 f6 stainless steel shaft (Ø10 optional), it supports radial and axial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates from -40 to +85 °C.

  • Interface CANopen / CAN (C2) or CAN fiber optic (CF) until 1 MBaud.
  • Resolution of up to 16 bit per turn and 30 bit in 16384 turns.
  • CAN Transceiver ISO 11898 and 2 LED of state.
  • Nutrition 10–30 V DC with maximum consumption of 2.5 W.

Technical Frequently Asked Questions

What resolutions and lap times can the A/958SC be configured for?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution and 1, 4096 or 16384 revolutions, with a maximum resolution of 30 bits at 16384 revolutions.

What parameters are programmable in the CANopen interface?

Direction of rotation (complement), resolution per revolution, total resolution, preset value, cams, 2 limit switches, speed, baud rate and CAN identifier, and transmission mode: polled mode, cyclic mode, sync mode or cos mode.

What connections are available?

IP65 connection cover (3PG), IP65 connection cover + LED (3PG-D), IP65 stainless steel connection cover (3PG-VA), IP65 2-wire connection cover (2M20), IP65 5-pin round connector (1BW), two IP65 5-pin round connectors (2BW) and fiber optic connector (1HW).

Properties

FeatureSpecification
Mechanics
HousingAluminum, Ø58 mm (customizable upon request)
Weight550 g single turn · 600 g multiturn
AxisØ6 f6 stainless steel (optional Ø10)
max radial/axial load.40 / 110 N
Electric
Exit-side protectionIP65 according to connection
Power supply / max. consumption.10–30 V DC · 2.5 W
LSB pitch frequency800 kHz
Exit codeBinary
Division accuracy±½ LSB (<13 bit) ±2 LSB (13–16 bit)
Max resolution.16 bit/turn · 30 bits in 16384 turns
InterfaceCANopen / CAN (C2) · CAN fiber optic (CF) · max. 1 MBaud
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C / -40 … +85 °C
ReferenceConfiguration
958SC-16-14-06-B-C2-0-3PG958SC161406BC203PG65536 steps/rev. · revolutions: 16384 · standard Ø6 mm shaft · Binary · CANopen / CAN · Connection cover · IP65
ELCIS A/958SC absolute fieldbus encoder
Dimensional drawing of the ELCIS A/958SC absolute fieldbus encoder

Related documentation, cases, and guides

Other products

B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel reference pH electrode, epoxy body, size 75x12. with 1.5m BNC cable.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 V max. | IP67 | M12 connector or cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 Ø6, 8, 9.52 or 10 mm | Flange Ø72 mm | 1–1250 imp/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed) | Dual detector and amplifiers
NESA Environmental Meters
4÷20mA / ModBus RS485 | CO | 0÷300 / 0÷1000 ppm | -20 ÷ 50°C | 11…30 Vdc | IP54 | 230g
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT Converter | Outputs 0/4-20mA, 0/10VDC, ±10V, ±20mA | DIN Rail, Aluminum Housing, OEM Customizable | Infinite Resolution
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
16 or 25-bit SSI, Gray or binary | Ø 28 mm | Resolution up to 18 bits | Ø 6 mm shaft or press coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67 | 14 or 16 turns (up to 5760°)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Flange Ø115, shaft Ø11 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
2 cantilever metric casters | Wheels Ø79.8 mm | 1, 10 or 1000 mm/imp | NPN or push-pull | 5 V ±5 % or 12–24 V | IP52 shaft; IP65 wired output | Up to 180 kHz
NESA Environmental Meters
4÷20mA / ModBus RS485 | NH3 | 0÷100 / 0÷1000 ppm | -40 ÷ 50°C | 11…30 Vdc | IP54 | 230g
DPF Sensors logo
Clinometer for use in civil works, geology
Shopping Basket