DPF-CX03-e
Clinometer for use in civil works, geology
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
Ground control inclinometer with record
Properties
Range: ±15/ ±30 º
Axles: 2
Bluetooth Communication
IP67 protection.
Battery powered
Registration and control software. MOBILE APP
With 60 or 100 meters of cable
Clinometer for use in civil works, geology
Precision: ±0.003º
Repetitiveness: ±0.003º
Other products
PID controller (heat-cold), temperature probe reading, regulation output control, integrated in power SSR module
Isolated multiplexer of 8 thermocouples to a 4/20mA output (Active / Passive)
LVDT Displacement Sensor | Outputs 4-20mA, 0-10V, 0-5V | IP67 Waterproof | Diameter 10mm | German Grade Accuracy | Special for Crack Monitoring
Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC
Linear potentiometric probe sensor • 0…50 mm • spring return • cable output
Isolator for passive pickups. Passive output: 4/20 mA, input: 4/20 mA (for passive pickup) – 2 channels
Monoaxial or biaxial, Range ±10° to ±90º, Monoaxial to ±180º Outputs 4…20- 0-5VDC, RS-232, Modbus, Canbus, Accuracy ±0.1º and repeatability of ±0.05
Inductive toroidal conductivity probe with 4-20 mA output and RS485 Modbus RTU. Configurable ranges from 4 to 2,000 mS/cm and TDS up to 1,000 ppt.
16-channel 0/10V statically switched multiplexer