S-CO Carbon Monoxide Sensor

Budget-friendly price Request a quote
4÷20mA / ModBus RS485 | CO | 0÷300 / 0÷1000 ppm | -20 ÷ 50°C | 11…30 Vdc | IP54 | 230g

El NESA S-CO es un sensor para la medición de la concentración de CO (monóxido de carbono) para aplicaciones industriales y ambientales, específicamente realizado para aplicaciones en exterior con grado de protección IP54.

Principio de medida electroquímico o infrarrojo (NDIR) (según el gas), rango 0÷300 ppm o 0÷1000 ppm, resolución <2 ppm y tiempo de respuesta <30 s. Salida 4÷20mA / ModBus RS485.

Key points

  • Rango 0÷300 ppm o 0÷1000 ppm; resolución <2 ppm; límite de sobrecarga 2000 ppm
  • Tiempo de respuesta <30 s; vida útil >120 meses
  • Output 4÷20mA / ModBus RS485; power supply 11…30 Vdc; consumption < 2VA
  • Rango operativo -20 ÷ 50°C; humedad 15…90 %RH sin condensación; IP54; 230 g; CE

Technical Frequently Asked Questions

What range and resolution does it have?

0÷300 ppm o 0÷1000 ppm, con resolución <2 ppm.

What exits does it have?

4÷20mA / ModBus RS485.

What is their diet and consumption like?

Power supply 11…30 Vdc and consumption < 2VA.

Properties

FeatureSpecification
Measurement and operating principle
GasCO (monóxido de carbono)
Measurement principleElectrochemical or infrared (NDIR) (depending on the gas)
Range0÷300 ppm o 0÷1000 ppm
Resolution<2 ppm
Response time<30 s
Shelf life>120 meses
Overload limit2000 ppm
Exit signals
Exit sign4÷20mA / ModBus RS485
Power supply, environment, and mechanical data
Feeding11…30 Vdc
Consumption< 2VA
Operating range (°C)-20 ÷ 50°C
Humidity15…90 %RH non-condensing
Degree of protectionIP54
UseFor outdoor use
DimensionsView map
Weight230 g
Regulatory complianceEC
ReferenceConfiguration
S-COSCOOutput: ModBus RTU · Supply: Full scale 300 ppm or 1000 ppm, IP54, with 1 m cable
NESA S-CO Carbon Monoxide Sensor
Dimensiones del Sensor de monóxido de carbono S-CO de NESA

Other products

Differential pressure switch for air
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
ST315.21, Measuring range 0 to 2,000 mS, extendable and submersible. Working range 0 to 40°C
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø104 mm, hollow shaft H7 | Torque or pivot support | 100 to 2048 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP65 shaft (IP66 sealed) | CE Ex II 3GD, category 3
NESA Environmental Meters
4 default parameters | pH 0÷14 | Level 0÷20 m | -5 ÷ +60 °C | RS485 | 10.8 ÷ 16Vdc | 512×42mm
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
SPI (TTL) | Ø 48 mm | Resolution up to 14 bits | Shaftless: magnetic position marker | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP68 / IP69
ATESTEO LOGO, manufacturer of torque sensors
Driving Telemetry | Stepped Range 50 – 400 N·m | Class Accuracy ±0.10% | Analog Output ±10V | 16-Bit Resolution
Monitran-Logo
100 mV/g ±10% (IEPE) | 2Hz to 12kHz ±5% | ±50g | 40g | -25 to 120°C | C5015 2-pin connector | Ø19 mm base | Stainless steel, IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø80, servo-type flange | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
DPF Sensors logo
Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm
LVDT Manufacturer Logo Schreiber Messtechnik
Microcontroller-based LVDT | 5 to 15 mm range | M30x1.5 and 25x25 mm housings | IP67/IP66 | Scalable outputs | Threaded/lock mounting
Shopping Basket