IP67 potentiometric transducer with LWX-003 ball joints

Potentiometric output | Stroke 50 … 750 mm | Linearity ±0.04 … ±0.2 % | Resolution < 0.01 mm | 42 V max. | IP67 | M12 connector or cable

Novotechnik IP67 LWX-003 potentiometric transducer. Metal housing with differential pressure compensation.

Transductor de posición lineal potenciométrico con montaje por rótulas. Carrera eléctrica de 50 a 750 mm. IP67, linealidad independiente de ±0,04 a ±0,2 %, resolución mejor que 0,01 mm. Carcasa metálica con compensación de presión diferencial.

Key points

  • IP67 protection
  • All-metal casing
  • Differential pressure compensation with GORE membrane (stem pumping effect)
  • Double-supported stem
  • Montaje con rótulas de poca holgura y ángulo de giro libre amplio (hasta ±12,5°)

Technical Frequently Asked Questions

What can be connected to the IP67 LWX-003 potentiometric transducer?

It can be connected to Novotechnik M12 connectors and cables, Novotechnik linear sensor couplings and mountings, signal conditioners for standardized output signals (e.g., MUP-110) MUP, signal conditioners for standardized output signals MUK, and process-controlled indicators with MAP display.

How do I order the IP67 LWX-003 potentiometric transducer?

The order code has three fields: stroke (mm), model, and connection. For example, LWX-0150-003-101 is the version with a defined electrical stroke of 150 mm, model 003, and an M12x1 connector output. With 201 instead of 101, the output is a 1 m cable. All order references with their corresponding part numbers are listed in the reference table on this page.

Under what conditions does the IP67 LWX-003 potentiometric transducer operate?

Operating temperature: -30 … +100 °C. Protection: IP 67, also dynamic.

Properties

FeatureSpecification
Description
HousingAnodized aluminum
MountingKnee joints
Ball joints, standard modelSteel
Ball joints, optionalStainless steel for outdoor and corrosive environments (conversion kit, see accessories)
StemStainless steel (material no. 1.4305), swivel
BearingsMetal-polymer sliding bearings
Resistive elementConductive plastic
CursorMulti-finger made of precious metal, cushioned by elastomer
Electrical connectionM12x1 4-pole round connector; or 1 m shielded 3-wire PVC cable, 3 x 0.5 mm² (AWG 20).
Electrical data
Resistance tolerance± 20 %
Repeatability0.01 mm
Recommended cursor current≤ 1 µA
Maximum cursor current in case of failure10 mA
Maximum permissible applied voltage42 V
Effective temperature coefficient of the output voltage / applied voltage ratiotyp. 5 ppm/K
Insulation resistance (500 VDC)≥ 10 MΩ
Dielectric strength (500 VAC, 50 Hz)≤ 100 µA
Mechanical data
Horizontal drive forcetyp. 50 N
Vertical drive forcetyp. 50 N
Horizontal starting force (*)150 N
Environmental conditions
Working temperature-30 … +100 °C
Working humidity0 … 95 % HR (non-condensing)
Vibration5 … 2000 Hz, Amax = 0.75 mm, amax = 20 g
Shock50 g, 11 ms
Lifetypical > 50 x 10⁶ movements
Maximum working speed5 m/s
Protection (DIN EN 60529)IP 67, also dynamic
Connection assignment
ConnectionCable color
1brown
2black
3red
ReferenceConfiguration
100100Art. 400026304 · Connector: reference: LWX-0100-003-101 · 1 m cable: reference: LWX-0100-003-201 · Art.: 400026404
150150Art. 400026306 · Connector: reference: LWX-0150-003-101 · 1 m cable: reference: LWX-0150-003-201 · Art.: 400026406
175175Art. 400026307 · Connector: reference: LWX-0175-003-101 · 1 m cable: reference: LWX-0175-003-201 · Art.: 400026407
225225Art. 400026309 · Connector: reference: LWX-0225-003-101 · 1 m cable: reference: LWX-0225-003-201 · Art.: 400026409
250250Art. 400026310 · Connector: reference: LWX-0250-003-101 · 1 m cable: reference: LWX-0250-003-201 · Art.: 400026410
300300Art. 400026312 · Connector: reference: LWX-0300-003-101 · 1 m cable: reference: LWX-0300-003-201 · Art.: 400026412
360360Art. 400026314 · Connector: reference: LWX-0360-003-101 · 1 m cable: reference: LWX-0360-003-201 · Art.: 400026414
450450Art. 400026318 · Connector: reference: LWX-0450-003-101 · 1 m cable: reference: LWX-0450-003-201 · Art.: 400026418
5050Art. 400026302 · Connector: reference: LWX-0050-003-101 · 1 m cable: reference: LWX-0050-003-201 · Art.: 400026402
500500Art. 400026320 · Connector: reference: LWX-0500-003-101 · 1 m cable: reference: LWX-0500-003-201 · Art.: 400026420
600600Art. 400026324 · Connector: reference: LWX-0600-003-101 · 1 m cable: reference: LWX-0600-003-201 · Art.: 400026424
7575Art. 400026303 · Connector: reference: LWX-0075-003-101 · 1 m cable: reference: LWX-0075-003-201 · Art.: 400026403
750750Art. 400026330 · Connector: reference: LWX-0750-003-101 · 1 m cable: reference: LWX-0750-003-201 · Art.: 400026430
Novotechnik LWX-003 IP67 potentiometric transducer with ball joints
Dimensional drawing IP67 potentiometric transducer with ball joints LWX-003 Novotechnik

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Salida incremental | Mando Ø80 mm | 100 imp/vuelta con enclavamiento | Salidas NPN y driver 26LS31 | Alimentación 5 V o 15–24 V | IP50 lado eje | Bornas Phoenix MS (IP00), axial
Industrial LOW pressure transducer
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
44 mm square flange | Shaft Ø6 h7, centered Ø20 h7 | 1–2540 imp/rev | NPN, PNP, push-pull, driver, TTL | 5–30 V | IP66 shaft (IP53 under torque) | 60 kHz (100 kHz optional)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Stroke 10 … 300 mm | Linearity ±0.05 … ±0.25 % | Resolution < 0.01 mm | 42 V max. | -40 … +100 °C | Unprotected (open housing)
Indoor humidity and temperature sensor with ModBus RS485 communication
ATESTEO LOGO, manufacturer of torque sensors
Aseptic Optical Telemetry | 110,000 – 150,000 N·m | 7,000 RPM | PCD flange 400.0 mm | Inertia 2.4909 kg·m²
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Current output 4 … 20 mA | Ø 69 mm | 12-bit resolution | Shaftless: magnetic position marker | 12/24 VDC (9 … 34 VDC) | IP67 / IP69K | 60° to 360°, 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Carcasa metálica Ø50 mm | Eje Ø8 mm inoxidable | 10 a 2500 impulsos/vuelta | NPN, push-pull o line driver | 5 V ±5 % o 12–24 V | IP52 eje, IP65 salida | Frecuencia máx. 180 kHz
ATEX pressure transducer

Request a quote or technical information

Please tell us the quantity you need to measure, the range, the accuracy, the output signal, or any other requirements of your application.

We will help you select the right equipment and send you a quote or technical documentation.

You can also contact us by phone:

91 764 21 00

Shopping Basket