Single-turn Absolute Encoder A/958HS

Budget-friendly price Request a quote
Servo mounting Ø58, shaft Ø10 h8 | Up to 16 bits per revolution | SSI or SSI + preset, RS422/RS485 | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary | LSB step 800 kHz

The ELCIS 958HS (A/958HS) is a Ø58 mm SSI single-turn absolute encoder for industrial use, with servo-type fixing by means of front clips or screws.

The A/958HS is a single-turn absolute encoder with optical readout via an IR photodiode array. It allows selection of 4096, 8192, 16384, 32768, or 65536 steps per revolution, with a maximum resolution of 16 bits. It transmits position data via an SSI serial interface (RS422 line driver) with a clock frequency of 100 kHz to 1 MHz, in Gray code or binary code, and is available in preset (S1) and preset push-button (S4, radial output only) variants. Options: Q (all stainless steel), W (sealed bearings), and X (custom option).

Manufactured with a Ø58 mm aluminum body and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports radial loads of 40 N and axial loads of 110 N. It features standard IP64 or sealed IP66 protection, withstands impacts of 30 G and vibrations of 10 G, and operates in a thermal range of -40 to +85 °C (with cable: -5 to +70 °C).

  • Maximum resolution of 16 bit per lap.
  • Serial interface SSI with line driver RS422 and watch 100 kHz a 1 MHz.
  • Variants with preset function (S1) or with a preset button (S4, (radial output only).
  • Temperature range of -40 a +85 °C with protection up to IP66.

Technical Frequently Asked Questions

What resolutions does the A/958HS offer?

It allows you to choose 4096, 8192, 16384, 32768 or 65536 steps per revolution, with a maximum resolution of 16 bits.

What are the differences between the SSI interface options (SL, S1, and S4)?

The SL is the standard SSI interface. The S1 is the same as the SL, but with a preset function. The S4 is the same as the SL, but with a preset button, and is only available with a radial output.

What connectors and cables are available?

It is supplied with a 1 m cable with IP65 rating in axial (CAW) or radial (CRW) output, or with 12-pin connectors with IP65 rating in axial (PAL) or radial (PRL) configuration.

Properties

FeatureSpecification
Mechanics
Casing / WeightAluminum · 200 g (customizable upon request)
Axis / radial-axial load max.Ø10 h8 stainless steel (optional Ø6) · 40 / 110 N
Starting torque / bearing life50 gcm standard · 90 gcm sealed · >10⁵ ha 1000 rpm
Electric
Power supply / max. consumption.10–30 V DC · 1 W (SL) · 1.5 W (S1)
Light source / sensorsLED (useful life ≥ 100,000 h) · IR ASIC photodiode array
LSB pitch frequency800 kHz
Max. resolution / codes16 bit / 1 turn · Gray, Binary · division precision ±1/2 LSB (<13 bit), ±2 LSB (13–16 bit)
Interface / OutputSSI (SL), SSI + preset (S1/S4) · line driver RS422/RS485
Protection and environment
IP protectionIP64 on the axis (IP66 sealed) · IP65 at the outlet depending on the connection
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-40 … +85 °C (with wired output: -5…+70 °C)
Humidity98 % (without liquid state)
Other features
ConnectionCable 1 mo 12-pin connector, axial or radial
ReferenceConfiguration
A/958HS-12-00-10-G-SL-0-PRLA958HS120010GSL0PRL4096 steps/rev. · 1 (single turn) · Standard Ø10 mm shaft · Gray · Interface: SL · 12-pin radial connector · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/958HS Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/958HS single-turn absolute encoder

Related documentation, cases, and guides

Other products

NESA Environmental Meters
Support arm | 700/750 mm | Jaws Ø 40 mm | Post Ø max. 60 mm | Anodized aluminum | Stainless steel screws.
NESA Environmental Meters
4 default parameters | pH 0÷14 | Level 0÷20 m | -5 ÷ +60 °C | RS485 | 10.8 ÷ 16Vdc | 512×42mm
NESA Environmental Meters
4÷20mA / ModBus RS485 | H2S | 0÷100 / 0÷2000 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo flange Ø44 mm, shaft Ø6 h7 | 8192 steps/revolution (13 bits) | SSI (RS422), natural binary | Power supply 5 V, 5–30 or 10–30 V | Max. frequency 500 kHz | Impacts 100 G (6 ms)
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 50 N·m – 500 N·m | 30,000 RPM | PCD flange 101.5 mm
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity range from 4 to 2,000 mS/cm and TDS (total dissolved solids) from 10ppt to 1,000ppt 4…20mA and Modbus output
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector
Monitran-Logo
Dual output: 4-20 mA proportional to RMS speed + AC proportional to acceleration | AC 100 mV/g 50 mV/g | 2 Hz to 1 kHz ±10% (mm/s) | 12-32 V DC | -25 to 90 °C | Stainless steel, IP67 / IP68 (1186W)
Differential pressure switch for air
DPF Sensors logo
Indoor CO2 sensor, range up to 4000 ppm, analog output and digital alarm
Shopping Basket