ST311 CONDUCTIVITY SENSOR

4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector

Manufacturer: B&C Electronics
Category: Water quality, SENSORS, Conductivity Sensors

The B&C Electronics ST311 electrical conductivity sensor is a conductivity cell designed to measure electrical conductivity in a wide variety of industrial processes. This sensor is ideal for measurements above 20 mS/cm and is the preferred choice when a specialized conductivity meter is required.

The ST311 conductivity meter employs a 4-electrode measurement method that automatically compensates for errors caused by dirt on the electrodes. This design reduces electrical contact with the sample and, when the electrodes become dirty, the instrument automatically supplies a higher voltage to maintain a constant field. This ensures high linearity in measurement over time and minimises the maintenance required. In addition, thanks to temperature compensation with a PT-100 probe, the accuracy of electrical conductivity measurement is excellent.

Properties

Technical Features B&C Electronics Conductivity Sensor
Cell constant	K=1 cm^-1 (2 µS to 2,000 mS)
Body material	PVC
4 electrodes	316S Stainless Steel
Thread	1” BSP
Maximum working temperature	80ºC
Temperature compensation	PT100 sensor on the probe
Maximum working pressure	3Bar

Other products

Low Cost Incremental Encoder I/44EA

Shaft Ø6 h7, housing Ø44 mm | Centering Ø20 h7 | 1 to 2500 imp/rev | Push-pull or line driver | Power supply 5–24 V (driver: 5 V) | IP54 shaft side | 100 kHz (160 kHz optional)

Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS

MTN/1109 Industrial Accelerometer

Output 10-100mV/g | Frequency 2Hz-8kHz | Negative Power Supply -24VDC | Temperature -55 to 140°C | IP67 Protection | Stainless Steel | Isolated AC Output | Isolated Base | 3-Wire Connection | Top Entry Mounting

Accelerometers and Vibration Sensors, Amplified, ATEX, SENSORS

TUNA 20 Air duct flow sensor

TUNA 20 FLOW

Caudal, SENSORS

IKTC

Industrial resistive displacement sensor, range from 50 mm to 1250 mm

Displacement, SENSORS, Potentiometric linear sensors

Piezas S (cursores de repuesto)

4 dedos amortiguados | Fuerza de contacto 0,14 N | Eje Ø 3 mm y Ø 6 mm

Accesorios Novotechnik

Single-turn Absolute Encoder A/959C

Ø59, hollow shaft Ø15 F7 | Elastic coupling | 360, 4096, 8192 or 65536 steps | Parallel, push-pull 20 mA | 10–30 V | IP64 shaft (IP66 sealed) | Gray or binary

Encoder, Absolute Encoder, Single-turn Absolute Encoder, SENSORS

Robust Incremental Encoder ATEX I/104

Carcasa Ø104 mm, eje hueco H7 | Soporte de par o pivote | 100 a 2048 imp/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP65 eje (IP66 sellado) | CE Ex II 3GD, categoría 3

Encoder, Incremental Encoder, ATEX Explosionproof Incremental Encoder, Robust Incremental Encoder, SENSORS

A/963P Absolute Fieldbus Encoder

PROFIBUS-DP Class 2, 12 Mbaud | Square flange □63.5 mm | Shaft Ø10 h8 | 16 bit; 30 bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)

Encoder, Absolute Encoder, Absolute Encoder Fieldbus, SENSORS

B&C SZ1025 pH Sensor

Combined glass/gel reference pH electrode, epoxy body. 9m cable. Low cost.

Water quality, SENSORS, pH and Redox Probes

OFI-RTD-IN-minidis

Wall temperature sensor with Pt100 sensor, built-in Data Logger and indicator.

Signal converters, Digital indicators, INSTRUMENTATION, SENSORS, Temperature sensors, Ambient temperature sensors, Temperature sensors for air conditioning, Temperature, Temperature