SSU sensor support arm

Budget-friendly price Request a quote
Support arm | 700/750 mm | Jaws Ø 40 mm | Post Ø max. 60 mm | Anodized aluminum | Stainless steel screws.

The NESA SSU is a sensor support arm, 700/750 mm in length, with clamping jaws of Ø 40 mm for NESA sensors and fixing to poles of max. Ø 60 mm.

It is made of 10mm thick anodized aluminum and has stainless steel screws.

Key points

  • Support arm 700/750 mm in length
  • Sensor clamping jaws Ø 40 mm, for NESA sensors
  • Fixing to posts of max. Ø 60 mm
  • 10mm thick anodized aluminum
  • Stainless steel screws

Technical Frequently Asked Questions

What is the SSU?

A support arm for NESA sensors, 700/750 mm in length.

What diameters does it support?

The sensor clamping jaws are Ø 40 mm and the mounting supports posts with a maximum diameter of 60 mm.

What material is it made of?

Made of 10mm thick anodized aluminum, with stainless steel screws.

Properties

FeatureSpecification
Support arm
Product typeSupport arm for sensors
Length700/750 mm
MaterialAnodized aluminum
Thickness10 mm
Subjection
Sensor clamping jawsØ 40 mm
Post mountingMax. diameter 60 mm
ScrewsStainless steel
ReferenceConfiguration
SSUSSUDescription: Support arm, length 700/750 mm, with Ø 40 mm clamping jaws for sensors and fixing to posts of max. Ø 60 mm. Stainless steel screws
NESA SSU Sensor Support Arm

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Wire diameter 0.51 mm | Stroke 750 or 1500 mm | Potentiometric output (divider) | Potentiometer 1 kΩ | Linearity ±0.25 % fs | IP50 potentiometer (IP54 mechanical) | Connection length 1 to 5 m
Monitran-Logo
4-20 mA ∝ rms speed | 0-10 to 0-100 mm/s | 2 Hz to 1 kHz ±10 % | Ex ia I Ma | Ui 28 V · Ii 93 mA · Pi 0.65 W | 12-32 V DC | Stainless steel, IP67 (IC) or IP68 (IW, submersible) | Group I (mining)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined pH electrode with glass body and double ring junction, range 0–13 pH, 9m cable and online service up to 10 bar.
Monitran-Logo
100 mV/g ±10% (IEPE) | 2Hz to 12kHz ±5% | ±50g | 40g | -25 to 120°C | C5015 2-pin connector | Ø19 mm base | Stainless steel, IP67
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Ratiometric output 0.25…4.75 V | Length 40mm, 7mm high | Resolution 12 bits | Without shaft: magnetic position marker | 5 VDC (4.5 … 5.5 VDC) | IP67 / IP68 / IP69 | 1 or 2 channels
ATESTEO LOGO, manufacturer of torque sensors
Light-Beam Telemetry (Optical) | Extended Range 200 N·m | Peak 40,000 RPM | PCD Flange 66.0 mm | Inertia 0.0003 kg·m²
NESA Environmental Meters
0÷2Vdc · 4÷20mA · RS485/Modbus | 0÷100% VWC · -40°C ÷ +70°C | FDR 70MHz · PT100 | AISI 316L STAINLESS STEEL electrodes | 71 x 45 x 16mm | 12÷24Vdc | IP68
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø10 | Ø59, star coupling | Up to 2048 steps (11 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
NESA Environmental Meters
4-wire Pt100 | -40 ÷ +60 °C | Pt100 1/3 DIN (±0.1 °C @ 0 °C) | Sphere approx. 150 mm | Resolution 0.01 °C | WMO Annex.8
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo mounting Ø58, shaft Ø6 h7 | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed) | Gray, Binary, Excess or BCD
Shopping Basket