Hydrogen sulfide sensor S-H2S
Budget-friendly price Request a quote
4÷20mA / ModBus RS485 | H2S | 0÷100 / 0÷2000 ppm | -30 ÷ 50°C | 11…30 Vdc | IP54 | 230g
- Manufacturer: Nesa
- Category: Gases - Particles, Meteorology – Climatology, SENSORS
El NESA S-H2S es un sensor para la medición de la concentración de H2S (sulfuro de hidrógeno) para aplicaciones industriales y ambientales, específicamente realizado para aplicaciones en exterior con grado de protección IP54.
Electrochemical or infrared (NDIR) measurement principle (depending on the gas), range 0÷100 ppm or 0÷2000 ppm, resolution < 0.1 ppm (100) or < 1 ppm (2000) and response time <30 s. Output 4÷20mA / ModBus RS485.
Key points
- Range 0÷100 ppm or 0÷2000 ppm; resolution < 0.1 ppm (100) or < 1 ppm (2000)
- Tiempo de respuesta <30 s; vida útil >24 meses
- Overload limit 500 ppm (range 0÷100 ppm) or 4000 ppm (range 0÷2000 ppm)
- Output 4÷20mA / ModBus RS485; power supply 11…30 Vdc; consumption < 2VA
- Operating range -30 ÷ 50°C; humidity 15…90 %RH non-condensing; IP54; 230 g; CE
Technical Frequently Asked Questions
What range and resolution does it have?
0÷100 ppm (resolution < 0.1 ppm) or 0÷2000 ppm (resolution < 1 ppm).
What exits does it have?
4÷20mA / ModBus RS485.
What is their diet and consumption like?
Power supply 11…30 Vdc and consumption < 2VA.
Properties
| Feature | Specification |
|---|---|
| Measurement and operating principle | |
| Gas | H2S (hydrogen sulfide) |
| Measurement principle | Electrochemical or infrared (NDIR) (depending on the gas) |
| Range | 0-100 ppm or 0-2000 ppm |
| Resolution (0÷100 ppm) | < 0.1 ppm |
| Resolution (0÷2000 ppm) | < 1 ppm |
| Response time | <30 s |
| Shelf life | >24 months |
| Overload limit (0÷100 ppm) | 500 ppm |
| Overload limit (0÷2000 ppm) | 4000 ppm |
| Exit signals | |
| Exit sign | 4÷20mA / ModBus RS485 |
| Power supply, environment, and mechanical data | |
| Feeding | 11…30 Vdc |
| Consumption | < 2VA |
| Operating range (°C) | -30 to 50°C |
| Humidity | 15…90 %RH non-condensing |
| Degree of protection | IP54 |
| Use | For outdoor use |
| Dimensions | View map |
| Weight | 230 g |
| Regulatory compliance | EC |
| Reference | Configuration |
|---|---|
| S-H2SSH2S | Output: ModBus RTU · Supply: Full scale 100 ppm or 2000 ppm, IP54, with 1 m cable |


Related documentation, cases, and guides
Other products

Piezoelectric Ultrasound 65 kHz | 0÷6 m | 0.1 % fs @ 20°C | 4÷20mA | 10.8÷30 Vdc | IP66 | 180 x 162 mm

Thread Ø 0.9 mm, 8 m/s | Stroke up to 2000 mm | Incremental, resolution 0.1 or 1 mm | NPN, PNP, push-pull, 1 Vpp | 4–20 mA, 0–10 V or pot. 1kΩ | Power 5, 12, 24 V ±5 % or 8–30 V | IP64 encoder (IP53 mechanical)

13 or 16 tooth pinion | With integrated pinion preload | Linear resolution 0.001 to 1 mm | 1 to 10000 impedances/revolution | NPN, PNP, push-pull, driver, TTL | Power supply 5–30 V | IP64 shaft (IP66 sealed)

Servo flange Ø38 mm, shaft Ø6.35 h7 | 8 to 2048 bpm/rotation | Line driver 26LS31/ET7272, NPN | Power supply 5, 8–24, 18–28, 10–30, 5–30 V | IP64 shaft (IP66 sealed) | 12000 rpm with low torque (option B) | Impacts 100 G (6 ms)

OEM position transmitter for HP/LP bypass valves, turbine control valves, and steam conditioning systems

Quad-band | Data and/or voice | Serial or USB | Metal housing | 58 x 54 x 25 mm | +5.5 to +32 VDC

Accelerometer with 3 axes, the output signal can be in mA, Vcc and RS485 communication

CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER

Ø58 mm, servo, Ø6 f6 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz