A/958H Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Ø58 mm, servo, Ø10 h8 shaft | Up to 25 bits in 4096 revolutions | Parallel or parallel with preset | Push-pull 20 mA | 10–30 V power supply | IP64 shaft (IP66 sealed) | Step frequency 200 kHz

The ELCIS 958H (A/958H) is a 58 mm diameter, 25-bit, 4096-turn absolute multi-turn encoder with a 20 mA push-pull parallel output and a 200 kHz LSB step rate. In industrial environments, it is servo-mounted using front-mounted clamps or screws. It features a 10 mm diameter h8 stainless steel shaft (6 mm diameter optional) that withstands radial and axial loads of 40 and 110 N, IP64 protection on the shaft side (IP66 in the sealed version), resistance to 30 G of impact and 10 G of vibration, and operation between -30 and +70 °C.

The A/958H is a multi-turn absolute encoder with optical readout via LED and IR photodiode array. It allows selection of 4096, 8192, or 65536 steps per revolution and 16, 256, or 4096 revolutions, with a maximum resolution of 25 bits at 4096 revolutions. It outputs the position in Gray or Binary code via a parallel (PP) or parallel with preset (P1) interface, with a 20 mA push-pull output stage and a 200 kHz LSB step rate.

Built with a Ø58 mm aluminum housing and a Ø10 h8 stainless steel shaft (Ø6 optional), it supports radial and axial loads of 40 and 110 N. It has IP64 protection on the shaft side (IP66 in the sealed version), withstands impacts of 30 G and vibrations of 10 G, and operates in a thermal range of -30 to +70 °C.

  • Maximum resolution of 25 bit in 4096 turns.
  • Exit codes Gray and Binary with accuracy up to ±½ LSB (<13 bit).
  • Parallel output interface (PP) or parallel with preset function (P1).
  • Push-pull output stage of 20 mA fed to 10–30 V DC with 200 kHz LSB.

Technical Frequently Asked Questions

What resolutions and laps can the A/958H be configured for?

It allows you to choose 4096, 8192 or 65536 steps per revolution and 16, 256 or 4096 revolutions, with a maximum resolution of 25 bits at 4096 revolutions.

What is the difference between PP and P1 interfaces?

The PP interface displays the angular value on the output connector in parallel; the number of conductors is proportional to the resolution and the code type. The P1 interface is the same as the PP interface, but with a preset function.

What mechanical and sealing options are available?

The standard version offers IP64 protection on the shaft with bearings for 6000 rpm continuous operation. The W option incorporates sealed bearings with IP66 protection at 3000 rpm, and the Q option is manufactured entirely from stainless steel.

Properties

FeatureSpecification
Mechanics
HousingAluminum (customizable upon request)
Weight400 g
AxisØ10 h8 stainless steel (optional Ø6)
max radial/axial load.40 / 110 N
Electric
Exit-side protectionIP65 according to connection
Feeding10–30 V DC
Max. consumption.100–400 mA according to bits
LSB pitch frequency200 kHz
Exit codesGray, Binary
Max resolution.25 bit / 4096 laps
Interface / OutputParallel (PP) · Parallel with preset (P1) · Push-pull 20 mA
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance30 G (11 ms) 10 G (10–1000 Hz)
Operating/storage temperature-30 … +70 °C / -40 … +85 °C
ReferenceConfiguration
A/958H-12-12-10-B-P1-0-CVA958H121210BP10CV4096 steps/rev. · revolutions: 4096 · standard Ø10 mm shaft · Binary · Parallel + Preset · 1 m axial cable · max. 25 bits · IP65
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/958H Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/958H multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
13-bit SSI, Gray code | Ø 28 mm | 12-bit resolution | Ø 6 mm shaft or press-fit coupling | 5 VDC or 24 VDC | IP54 / IP65 / IP67
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø80, servo-type flange | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6
ATESTEO LOGO, manufacturer of torque sensors
Inductive (Dual-Frequency) | 1,000 – 3,000 N·m | 16,000 RPM | PCD Flange 130.0 mm
AIVIM logo
Electrochemical sensor | From 1% to 100% | Titanium and Zinc | 4–20 mA, RS485/MODBUS RTU | Up to 10 bar
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Hollow shaft H7 up to Ø15 | Ø59, tangential anti-rotation pin | Up to 8192 steps (13 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP64 shaft (IP66 sealed)
Dimetix_AG-1
Industrial laser sensor for measuring up to ~100 m directly on natural surfaces and up to 150 m with reflector, with ±1 mm @2σ and up to 100 Hz.
Dimetix_AG-1
Dimetix Rango Real-Time Millimeter Direct Read HMI Panel: Millimeter Reflection Accuracy and High Brightness LED Display (RS-422)
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Voltage divider | Ø 50.8 mm | Shaft Ø 6 mm (or Ø 6.35 mm) | Ub max. 42V | IP40 | 355° ±2, linearity ±0.05 %
LVDT Manufacturer Logo Schreiber Messtechnik
LVDT inductive sensor | Strokes 5–20 mm depending on version | M12×1 threaded housing | Linearity 0.25 % / 0.5 % | IP66/IP67 | Moving core or spring-loaded probe | External electronics
Shopping Basket