Explosion-Proof Single-Turn Absolute Encoder A/80EXS

Budget-friendly price Request a quote
Housing Ø80, servo-type flange | Shaft Ø10 h7 | 7 to 12 bit (up to 4096 steps) | Parallel, SSI RS422 or analog | 5, 15, 8–24 or 18–28 V | IP65 shaft (IP66 with Z option) | ATEX Ex d IIC T6

The ELCIS 80EXS (A/80EXS) is a 7-12 bit explosion-proof, single-turn absolute encoder with an 80 mm diameter housing and servo-type flange mounting. Certified by ISSeP according to CENELEC and ATEX standards, it is suitable for environments with explosive atmospheres (except firedamp), and is marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X.

Resolution up to 4096 steps per revolution (12 bits) in Gray, Excess, or custom code. Versions: Parallel Gray or Excess (GP, EP), serial Gray or Excess (GS, ES, RS422 transmission), and analog current (A) or voltage (V) versions, the latter two only with 15 V or 18–28 V power supply and 4096 resolution. Electronics: NPN open collector, NPN open collector + PTC, NPN open emitter + PTC, and push-pull in parallel version; serial SSI; analog 4–20 mA and 0–10 V.

Aluminum base and cover, stainless steel shaft Ø10 h7, and 1300 g weight. Connection via 1 m IP66 cable (CV1, CV7) or 26c IP65 cable end connector (VM5, TM5, only outside potentially explosive atmospheres). Options: sealed bearings (Z), stainless steel housing (N), tropicalization (G), and custom options (X). Special safe operating conditions (symbol X): cable suitable for a minimum temperature of 100 °C permanently connected to the device, with a suitable free-end connection, and mounting screws of at least grade 8.8.

  • Marked II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X, ISSeP07ATEX018X certificate.
  • One-way trip 7 to 12 bit, until 4096 steps per lap.
  • Exit parallel, SSI series (RS422) either analog (the latter only with 15V or 18-28V and 4096 resolution).
  • Stainless steel shaft Ø10 h7, max. radial/axial load. 10 kg.
  • IP65 standard on the axle side e IP66 with sealed bearings (option Z).

Technical Frequently Asked Questions

What ATEX marking and certification does the 80EXS single-turn encoder have?

It has markings II 2 G Ex d IIC T6 Gb and D Ex tb IIIC T85°C Db IP6X, certified by ISSeP (ISSeP07ATEX018X) and notified by CESI (CESI02ATEX138Q), according to EN60079-0, EN60079-1 and EN60079-31, with ATEX directive 94/9/EC. Special conditions (symbol X): cable suitable for 100 °C minimum and mounting screws of at least 8.8.

What electronic outputs and interfaces does the 80EXS single-turn encoder have?

Parallel versions (GP, EP) with NPN open collector 10 mA, NPN open collector 10 mA + PTC, NPN open emitter 10 mA + PTC or push-pull 10 mA + PTC electronics; SSI series (GS, ES) with RS422 transmission and 125 kHz clock, only with Gray or Excess code; and analog in current (A) or voltage (V), only with 15 V or 18÷28 V power supply and 4096 resolution.

What connections and IP rating does it support?

1 m IP66 cable (CV1, and CV7 only in parallel GP, EP version) or 26c IP65 cable end connector (VM5) and 26c sealed IP65 (TM5), these two only outside of potentially explosive atmospheres. Shaft side: IP65 standard and IP66 with sealed bearings (Z). Option N: stainless steel housing.

Properties

FeatureSpecification
Mechanics
Base and lidAluminum (customizable upon request)
Weight1300 g
AxisØ10 h7 stainless steel
max radial/axial load.10 kg
Electric
Exit-side protectionAccording to connection: IP66 cable, connector at IP65 end of cable
Max resolution.4096 steps/turn (12 bit); single turn from 7 to 12 bit
Exit codesGray, Excess, Custom
Max frequency.50 kHz (SSI clock: 125 kHz)
Vcc Power Supply5 V ±5 %, 15 V ±5 %, 8÷24 V, 18÷28 V
Max. consumption.180 mA
Protection and environment
axle-side protectionIP65 standard · IP66 with sealed bearings (Z) (IP rating according to CEI EN 60529, EN 60529, IEC 529)
max. continuous RPM6000 standard · 3000 with sealed bearings (Z)
Impact/vibration resistance50 G (11 ms) · 12 G (10 ÷ 2000 Hz)
Ambient temp. (T6) / storage-20 … +40 °C / -30 … +85 °C
Other features
InterfacesParallel (GP, EP), SSI series (GS, ES; only with Gray or Excess code), analog in current (A) and in voltage (V) (only with 15 V or 18÷28 V power supply and 4096 resolution)
ReferenceConfiguration
A/80EXS-10-5-GP-1-CV7-RA80EXS105GP1CV7R10 steps/turn · 5 V ±5 % · gray · NPN open collector 10 mA; parallel version only (GP, EP) · 1 m cable, IP66 (parallel version GP, EP only) · radial output
A/80EXS-12-5-GP-1-CV7-RA80EXS125GP1CV7R12 steps/turn · 5 V ±5 % · gray · NPN open collector 10 mA; parallel version only (GP, EP) · 1 m cable, IP66 (parallel version GP, EP only) · radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
Explosion-proof absolute encoder ELCIS A/80EXS
Dimensional drawing of the ELCIS A/80EXS explosion-proof absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Ø59 mm, hollow shaft Ø15 F7 | Up to 30 bits in 16384 revolutions | SSI or SSI with preset (S1, S4) | Line driver RS422/RS485 | Power supply 10–30 V | IP64 shaft (IP66 sealed) | Built-in elastic coupling
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
PROFIBUS-DP Class 2, 12 Mbaud | Ø59 mm, servo-type mounting | Hollow shaft Ø15 F7 with coupling | 16-bit; 30-bit at 16384 turns | 10–30 V DC | IP64 shaft (IP66 sealed)
Monitran-Logo
100 mV/g ±10 % | 2 Hz to 10 kHz ±5 % | ±80 g | -55 to 140 °C (IP67) | IP67 or IP68 (100 m max.) | Top or side entry, with connector or cable
Monitran-Logo
Dual output: 4-20 mA proportional to RMS speed + AC proportional to acceleration | AC 100 mV/g 50 mV/g | 2 Hz to 1 kHz ±10% (mm/s) | 12-32 V DC | -25 to 90 °C | Stainless steel, IP67 / IP68 (1186W)
DPF Sensors logo
Indoor humidity and temperature sensor with ModBus RS485 communication
NCTE torque sensors.
NCTE Rotary Torque Sensor | 2300 Series | 100Nm | 10,000 RPM
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Incremental output | Ø66 mm drive | 100 pulses/revolution with latching | NPN, PNP, push-pull, driver | 5–30 V power supply | IP64 shaft side (IP65 cable) | 1 m CV radial cable
Keller logo
Differential pressure transducer for liquids
Monitran-Logo
100 mV/g ±10% nominal at 80 Hz | 2 Hz to 10 kHz ±5% | ±80 g | Constant current 0.5 to 8 mA | Stainless steel, IP67 / IP68 | With or without temperature output 10 mV/°C
Shopping Basket