A/7115 Multi-Turn Absolute Encoder

Budget-friendly price Request a quote
Ø11 h7 stainless steel spindle | Up to 65536 steps × 4096 revolutions | SSI with preset, Gray or binary | Optional Sin/Cos 1024 or RS422 16384 ppr | 10–30 V power supply | IP64 spindle (IP66 sealed) | Optional spindle diameters: Ø6, 8, 9.52 or 10

The ELCIS 7115 (A/7115) is a programmable multi-turn absolute encoder with SSI serial output, capable of up to 65,536 steps (16 bits) per turn and 4,096 turns (12 bits). Mechanical robustness is a key requirement of this model: anodized aluminum housing and cover, Ø11 h7 stainless steel shaft with up to 8 kg radial/axial load, resistance to 50 G of impact and 12 G of vibration, and operation between -20 and +85 °C.

As a programmable multi-turn absolute encoder, the A/7115 offers up to 65,536 (16-bit) resolution per revolution and up to 4,096 revolutions (12-bit), with SSI serial output (S1 interface with preset) in Gray or Binary code. It also supports an additional Sine/Cos output at 1024 ppr or incremental RS422 output of up to 16,384 pulses per revolution, and, with the PR option (max. 8,192 div/revolution), allows programming of code, resolution, preset, and address via software through USB or the RS422 interface itself.

With anodized aluminum base and cover and stainless steel shaft Ø11 h7 (up to 8 kg radial/axial load), it withstands impacts of 50 G and vibrations of 12 G, and works between -20 and +85 °C with IP64 protection on the shaft side (IP66 in sealed version).

  • Programmable resolution up to 65536 steps per revolution (16 bit) in 4096 turns (12 bit).
  • Serial interface SSI with preset, in code Gray either Binary programmable (PR option) by software via USB or through the interface RS422.
  • Additional exit Sin/Cos a 1024 incremental ppr RS422 up to 16384 pulses per revolution.
  • Impact resistance of 50 G (11 ms) already vibrations of 12 G (10–2000 Hz).

Technical Frequently Asked Questions

What is the maximum resolution offered by the A/7115?

Up to 65536 (16 bit) resolution per revolution in 4096 revolutions (12 bit), selectable between 1024, 4096, 8192, 16384, 32768 or 65536 divisions per revolution.

How do you program the encoder?

With the PR option (max. 8192 div/revolution), programming is possible via PC software connected by cable to a USB port that powers the encoder, or through the RS422 interface, which allows programming and data exchange in ASCII code. The software and cable are supplied upon request.

What additional outputs does it support besides the SSI?

Sin/Cos at 1024 ppr (option S) or incremental RS422 of 1024, 2048, 4096, 8192 or 16384 pulses per revolution (options I1 to I5).

Properties

FeatureSpecification
Mechanics
Weight900 g
AxisØ11 h7 stainless steel (alternatives Ø6, Ø8, Ø9.52, Ø10 or on request)
max radial/axial load.8 kg
Starting torque50 gcm standard · 90 gcm sealed
Electric
Exit-side protectionIP65 to IP66 according to connection
Feeding10–30 V
Max. consumption.200 mA
Maximum frequency (clock)500 kHz
InterfaceSSI with preset (S1)
Exit codesProgrammable: Gray, Binary
Max resolution.65536 (16 bit) in 4096 turns (12 bit)
Protection and environment
axle-side protectionIP64 standard · IP66 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature-20 … +85 °C / -30 … +85 °C
ReferenceConfiguration
A/7115-MG-4096-1030-S1-PR-CV-RA7115MG40961030S1PRCVRType: M · Gray · Resolution: 4096 · Power: 1030 · Interface: S1 · Interface option: PR · Cable length: 1 m · IP65 · Radial output
Other combinations of resolution, power supply, electronics and connection are available upon request: please contact us and we will confirm the exact reference.
ELCIS A/7115 Multi-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/7115 multi-turn absolute encoder

Related documentation, cases, and guides

Other products

Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Servo-type clamping Ø90 | Centering Ø80 h7 and Ø40 h7 | Ø12 h7 stainless steel shaft | 1 to 3600 impedances/revolution | NPN, push-pull, line driver, TTL | 5–30 V power supply | IP65 shaft (IP66 with Z-seal)
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Housing Ø58, shaft Ø10 h7 | SSI with preset, RS422 | Up to 65536 steps (16 bits) | Gray or binary programmable | 10–30 V | IP64 shaft (IP66 sealed) | Optional Sin/Cos 1024 or RS422 16384 ppr
DPF Sensors logo
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CANopen | 41.5 x 59 mm max. | 14-bit resolution | Shaftless: magnetic placeholder | 12/24 VDC (8 … 34 VDC) | IP67 / IP68 / IP69K | 1 or 2 channels
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Protective cover | Flange Ø115 mm, centered Ø85 h7 | Shaft Ø11 h7 stainless steel | 1 to 3600 rpm | NPN, push-pull, driver or discriminator | Power supply 5–30 V | IP65 shaft (IP66 with Z seal)
B&C Electronics – Italian manufacturer of industrial water sensors and analyzers
Combined glass/gel reference pH electrode, 9.5mm diameter Epoxy body and 1.5m cable with BNC connector.
DPF Sensors logo
Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc / 4…20 mA, CAN / RS485/ TTL / 422, Power supply 9…36 Vdc, IP67, Working temperature -40…+85ºC, accuracy ±0.2º
Dimetix_AG-1
Air-cooling jacket | Continuous forced cooling with compressed air | For Dimetix D-Series laser sensors | High-temperature environments: steel mills and foundries
NESA Environmental Meters
Humedad del suelo en VWC | 0÷100% VWC | FDR, no resistivo | ±3% (0-70% WC) | 0÷1,5Vdc diferencial | 5÷15 Vdc | IP68 · 145 x Ø40 mm
Shopping Basket