DPK400

Threaded flange 18×1 | Metal housing Ø40 mm | Aluminum base and steel cover | Solid shaft Ø6 h7 (optional Ø8 mm) | Corteco oil seal (IP65) | 10 to 2500 pulses/revolution | Max. frequency response 180 kHz | Power supply 5 VDC or 12÷24 VDC | Protection IP52 / IP65 | Weight 150 g

Graphite Sensor with built-in PT-100, 3m Cable, K=1 cm⁻1 Range from 2MicroSiemens to 2,000 milliSiemens,

Dimetix DBN-50-050 industrial laser sensor for distance and position measurement up to ~50 m on natural surfaces, with typical accuracy ±5.0 mm @2σ (±2.5 mm @1σ), frequency up to 10 Hz and analog output 0/4-20 mA.

Inductive (Dual-Frequency) | 10,000 N·m | 12,000 RPM | PCD Flange 196.0 mm

Light Telemetry (eS Series) | Flexible Range 50 – 100 N·m | Peak 25,000 RPM | PCD Flange 101.5 mm | Inertia 0.00210 kg·m²

4- or 8-cell load cell summing-compensation box with independent sensitivity compensation adjustment. IP65 waterproof enclosure.

B10 mounting flange | Resolution up to 16 bits per revolution | SSI serial interface or SSI with Preset | Gray or Binary codes | 10–30 VDC power supply | Ø11 h7 stainless steel spindle | Max. radial/axial load 180 N | Shock resistance 30 G (11 ms) | Bearing life > 10⁵ ha 1000 rpm | Weight 1800 g

Wire displacement sensor, ranges from 11000 ….. 35000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses

CONDUCTIVE ELECTRODES

Servo-type flange ('Size 15') Ø38 mm | Front centering Ø33 h7 | 8 ÷ 2048 pulses/rotation | Bidirectional version with zero (BZ) | 6000 rpm continuous (12000 with option B) | Ø6.35 h7 stainless steel shaft | Shaft side IP: 64 standard, 66 sealed (Z), 53 low torque (B) | Electronics: Driver 26LS31, Driver ET7272, NPN and NPN Open Collector | Shock resistance: 100 G (6 ms) | Power supply: 5 V, 8÷24 V, 18÷28 V, 10÷30 V, 5÷30 V, 8÷24/5 V, 18÷28/5 V