IPKM-XX
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
- Manufacturer: DPF Sensors
- Category: Displacement, SENSORS, Potentiometric linear sensors
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
Complete range with different degrees of robustness, depending on the application and space.
Ranges from 25 to 1250 mm, resistance between 5 Kohm and 20 Kohm, possibility of amplifiers with 4-20 mA / 0-10 Vdc output
Properties
Other products
Inclinometer with RS485 output, temperature-compensated, high precision. 1 or 2 axes. Temperature-compensated.
Signal duplicator – isolator 0/±10V input: 0/±10V (24V/20mA) isolated output 2 x 0/±10V power supply 24VDC (20.. 30V) isolated
Maximum Temp. 250°C | Sensitivity 50pC/g | Output 100mV/g (Amp) | Frequency 0.8Hz-12kHz | High Temp Integral Cable | No Electronics in Head | In-line Amplifier Required | Stainless Steel | IP67 Protection | Range ±80g
I/90AA – Incremental Encoder Ø 90 mm, hollow shaft Ø 12 mm, robust metal body with ATEX certification, resolution up to 25,000 dpi
Electrochemical Technology | -10 °C to +150 °C (SIP) | Stainless Steel and PEEK | DIN/ISO Clamp Connection
pH sensor for range 0 to 13pH with BNC connector. Double ring junction.
Wire displacement sensor, ranges from 4000 mm to 20000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Signal duplicator/isolator: 4/20mA (with excitation) and 0/10V (selectable). Potentiometer with two 0/10V or 4/20mA outputs (active/passive). Power supply: 24VDC to 230VAC.